Features
*Light source:1pcs 150W white LED
*Power consumption:180W
*Beam Angle:13.5 degree
*Electronic dimmer 0~100%
*Pan movement:540°
*Tilt movement:270°
*Pan/Tilt resolution:8-16bit
*Prism rotating 5-facet prism
*Focus:linear focus from close to far
*1 fixed gobo wheel: 8gobos plus blank
*1 rotated gobo wheel: 6gobos plus blank,gobo rotating 360°
*1 color wheel:7colors plus white
*Strobe:0-16Hz, from slow to fast, adjusting
*Control mode:Auto, sound active , DMX512
*DMX channel:16CH
* LCD display
*Pan/Tilt invert option
*Reset to factory settings option.
*Fan Cooling /Forced convection
Technical specifications
DMX Channel
Installation Instructions
Set up
Disconnect the power cord before replacing a fuse and always replace with the
same type fuse.
3.1 Fuse replacement
With a flat head screwdriver wedge the fuse hold out of its housing. Remove the
damaged fuse from its holder and replace with exact same type fuse. Insert the
fuse holder back in its place and reconnect power.
3.2 Fixture linking
You will need a serial data link to run light show of one or more fixtures using a
DMX-512 controller or to run synchronized on two or more fixtures set to a
master/slave operating mode. The combined number of channels required by all
the fixtures on a serial data link determines the number of fixtures the data link
can support.
3.3
3-Pin to 5-Pin conversion chart
Note! If you use a controller with a 5 pin DMX output connector. You will need to
use a 5pin to 3 pin as apter
CHAU-VET Model No: DMX5M. Or DMX 5F
The chart below details a proper cable conversion:
3.4 Setting up a DMX serial data link
At first link the first light and DMX control through XLR-connection signal cable,
then connect the light in series, as the follow:
3.5 Master/Slave fixture linking
1. Connect the (male) 3 pin connector side of the DMX cable to the output (female)
3pin connector of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a
(female) 3 pin connector to the input connector of the next fixture consisting of a
(male) 3 pin connector. Then, proceed to connect from the output as stated above
to the input of the following fixture and so on.
3.6 orientations
This fixture may be mounted in any position provided there is adequate room for
ventilation.
Unpacking instructions
On receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are presented, and have been
received in a good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows, sign of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture should be returned in original factory box and packing
Shipping
Ming Feng Lighting's shipment process is fast, reliable, and efficient. We carefully packages and ships products to ensure they arrive in excellent condition. With a strong focus on customer satisfaction, Ming Feng Lighting is committed to providing hassle-free and timely shipments.
Audited Supplier 
){kind=link}
){kind=link}