Factory Price Surge and Lightning Protection Single Aviation Obstruction Aircraft Warning Medium Intensity Aviation Obstruction Light

• Customization: Available
• Type: Low/Medium/High-Intensity, Medium Intensity Aviation Obstruction Light
• Emitting Color: White & Red, White
• Model NO.: MF-MI-A2
• IP Rating: IP66, IP66
• Operating Voltage: DC(12V 24V 48VDC) &AC(110-240VAC) or Others
• Average Power: 20W
• Circuit Protection: Integrated
• Body Material: UV Protection Polycarbonate
• Product Life Expectancy: 5 Years Plus
• Base Material: Die-Casting Aluminum
• Light Source: LED
• Available Colors: White(Other Color Is Optional)
• Horizontal Output: 360 Dgree
• Vertical Divergence: ≥3dgree
• Ambient Temperature: -40ºC~55ºC
• Trademark: MF
• Origin: China
• HS Code: 9405429000
• Production Capacity: 10, 000PCS/Months

Product Description

IP66 DC12V 24V 48V AC110-240V LED Medium-intensity Type A L865 Aviation Obstruction Light

Product Description

Parameter
 

Electrical Characteristics
Operating Voltage	DC(12V/24V/36V/48V) &AC(110-240V) or others
Average Power(W)	20
Instantaneous Power(W)	600
Lightning Surge	IEC61000-4-5 L- N ±3kV IEC61000-4-5 L- PE ±6kV IEC61000-4-5 N- PE ±6kV IEC61000-4-2 Contact discharge 8kV
Circuit Protection	Integrated
Physical Characteristics
Body Material	UV protected Polycarbonate
Base Material	Power-coated Die-casting aluminum
Mounting	190×190×θ12
Dimension(mm)	229×229×168
Weight(kg)	3
Product Life Expectancy	5 years plus
Environmental Factors
Ambient Temperature(ºC)	-40~55
Storage temperature(ºC)	-55~70
Humidity	10%-95%RH(No condensation)
Wind Speed	240Km/h
Waterproof	IP66
Light Characteristics
Light Source	CREE high intensity LED
Available Colors	White(Other color is optional)
Intensity(cd)	≥20,000cd (Daytime) ≥2,000cd(Night)
Horizontal Output(degrees)	360
Vertical Divergence(degrees)	3
Flash Characteristics	20-60 flashes per minute(factory setting: 20fpm)
Operation Mode	24 hours operation, 2 different modes
LED Life Experience(hours)	>100,000
Compliance
ICAO	Annex 14 Volume 1,'Aerodrome Design and Operations' Seventh edition July 2016, table 6.3 Medium-intensity Type A White Obstacle Light
FAA	L-865
Options Available
Flashing rate NVG(Night Vision Goggles) compatible LED GPS sync flashing RS485 communication Bird deterrent spike

Description

This LED Medium-intensity Type A L865 Aviation

Obstruction Light flashing white color, designed for

marking top of obstacle which height is between 105-150

meters.

Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance.

 

Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption.

 

Compliance:

ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium Intensity Type A / B /E Obstruction Light

 

 

FAA L-810

Product Features

Electrical

CREE ultra high intensity LED as light source saving power consumption and maintenance than incandescent light or

halogen lamp

 

Power supply available in DC(12V, 24V, 48V) or AC(110-240VAC)

Physical

Unique design and UV protected polycarbonate reflector for converging light

 

UV protection Powder coated bright yellow color base make better visibility

 

Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection

Pressure equalizing valve installed under the base to make sure the air could go through but water is avoid, so that

the whole light temperature won't be high to avoid the moist air enter due to pressure and temperature difference.

System Design

Built-in photocell for day/night operation(dusk to dawn operation)

 

Surge and lightning protection

 

Optional
 

Dry contact Alarm output for remote monitoring

 

GPS synchronization

 

Infrared LED for pilot using NVG

 

Dimensions

 

 

Installation Instructions

 

 

Production Line

 

Configuration

Model	Power Input	Flash Rate	Photocell	Dry Contact Alarm	GPS Sync Flashing	Control
MF-MI-A2	110-240VAC 12VDC 36VDC 48VDC	Steady 20FPM 30FPM 60FPM 40FPM	Built-in No	No Alarm Alarm	NO SYNC GPS SNYC	Used alone Used with controller

Where to Use

MF-MI-A2 medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is between 105-150 meters, and most time work with low intensity lights & medium intensity type B light installed on the lower place.

Company Profile

Ming Feng Lighting Co., Ltd. is a leading LED lighting manufacturer with its own factory. Our company specializes in the design, production, and distribution of high-quality LED lighting products. With years of experience in the industry, we have established a reputation for excellence and innovation in LED lighting technology. Our team of skilled professionals is dedicated to providing customers with the best LED lighting products and services. At Ming Feng Lighting Co., Ltd., we pride ourselves on our commitment to quality and customer satisfaction. Whether you are looking for residential or commercial LED lighting solutions, we have the expertise and resources to meet your needs.
FAQ

Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.

Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.

Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.

Q5: How long time to ship the goods if place an order?
A5:  Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.