IP66 AC110-240V LED Aircraft Warning Red Beacon Aeronautical Aviation Obstruction Obstacle Light for Power Transmission Tower Wind Turbine Control Tower

Product Description

IP66 AC110-240V LED Aircraft Warning RED Beacon Aeronautical Aviation Obstruction Obstacle Light for Power transmission tower Wind turbine Control tower
 

Features

 

This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height.

1.High-intensity LED technology for bright illumination and long-distance visibility.
2.Available in various colors (such as red, white, or a combination) based on application and regulatory requirements.
3.Advanced light control systems, including photocells or timers, for automatic activation during low visibility or nighttime conditions.
4.Durable and weather-resistant construction to withstand harsh environmental conditions.
5.Self-diagnostic features to detect and report operational issues for reliable functioning.
6.Essential for alerting pilots and aircraft personnel to the presence of tall structures or obstacles.
7.Enhance aviation safety by minimizing the risk of collisions and ensuring air navigation safety. Vital component of aviation infrastructure worldwide.

Electrical
1.3 high power CREE LED, make sure LED keep bright while use
2.Power supply in DC(48V)& AC(110-240VAC), the light could work normally when input 48VDC/110VAC/240VAC
3.LED power supply board includes short circuit and open circuit protection, Line surge protection by metal oxide varistor
Physical

1.Bird deterrent spike on top
2.Unique designed PMMA lens for converging light and good transparency
3.High translucency and anti-UV polycarbonate cover could use 3-5years without yellowing
4.UV protection Powder coated bright yellow color base make better visibility and also long life in harsh environments()
5.Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection
6.3/4inch thread hole make pole installation easy
7.No screw fix type - just twist, the cover will be fixed tightly
System design

1.Built-in photocell for day/night operation(dusk to dawn operation, automatically turn on when background luminance is below 50cd/m2 2.Steady/20FPM/30FPM/60FPM DIP switches on PCB
3.Surge and lightning protection
Optional

1.Infrared LED for pilot using NVG
2. Alarm contact(NO COM NC)for remote monitoring
3.GPS sync flashing
 

Light Source	LED
Available Colors	Red
Intensity(cd)	≥32.5cd(type B),others optional(10cd, 100cd,etc)
Horizontal Output(degrees)	360
Vertical Divergence(degrees)	≥10
Flash Characteristics	Steady-burning/20/30/60 adjustable
Operation Mode	Dusk-to-dawn Automatically as standard.
LED Life Experience(hours)	>100,000

Specifications

 

Electrical Characteristics
Lightning surge	IEC61000-4-5 L- N ±3kV
	IEC61000-4-5 L- PE ±6kV
	IEC61000-4-5 N- PE ±6kV
Electrostatic	IEC61000-4-2 Contact discharge 8kV
Environmental Factors
Ambient Temperature(ºC)	-40ºC~75ºC
Storage temperature(ºC)	-55ºC~70ºC
Humidity	10%-95%RH(No condensation)
Compliance
ICAO	Annex 14 Volume 1,' Aerodrome Design and Operations' Seventh edition July 2016, t able 6.3 Low-intensity Type A/B/E Obstacle Light
FAA	L-810
Options Available	NVG(Night Vision Goggles) compatible LED
	GPS sync flashing
	Dry contact alarm(NO COM NC)
	Flashing rate

Configuration

 

Model	Power input	Flash rate	Lens color	Photocell	Dry contact Alarm	GPSsync flashing	Control
MF-Ll-B2	110-240Vac&48Vdc 12VDC 24VDC 36VDC	Steady 20FPM 30FPM 6OFPM 40FPM	Red Clear	Built-in No	No Alarm Alarm	No SYNC GPS SNYC	Used alone Used with controller

Dimension

Installation

 (Mounting bracket is charged separately, and size is customized)

Wiring diagram

 

Applications

• MF-LI-B2 low-intensity light could be used alone on the top of the
  High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the height is lower than 45m.
  
  1.Tall Structures: Aviation obstruction lights are used to mark tall structures such as communication towers, skyscrapers, chimneys, and bridges, alerting pilots to their presence and preventing potential collisions.
  2.Wind Turbines: Wind farms consist of multiple turbines, and each turbine is equipped with aviation obstruction lights to ensure their visibility to aircraft, especially during low-visibility conditions or at night.
  3.Airports: These lights are crucial at airports to mark various structures, including control towers, hangars, runway lighting systems, and other buildings or equipment that may pose a potential hazard to aircraft.
  4.Power Transmission Lines: Aviation obstruction lights are installed on power transmission towers and lines to ensure their visibility, preventing aircraft from coming into contact with the electrical infrastructure.
  5.Helipads and Heliports: Helipads and heliports utilize aviation obstruction lights to mark their locations and guide helicopter pilots during takeoff, landing, and maneuvering procedures.
  6.Construction Sites: Temporary structures like cranes, tall buildings under construction, and other obstacles at construction sites require aviation obstruction lights to ensure aircraft are aware of their presence and maintain a safe distance.
  7.Offshore Installations:Oil rigs, offshore wind farms, and other offshore installations utilize these lights to mark their structures, ensuring the safety of aircraft operating in the vicinity.
  8.Radio and TV Broadcast Towers: Broadcasting towers are equipped with aviation obstruction lights to ensure their visibility to aircraft, preventing potential collisions.
  9.Mountainous Areas: Aviation obstruction lights are installed on mountains or hills to mark their presence to aircraft, aiding navigation and preventing accidents in challenging terrain.
  10.Any other tall structures or obstacles that may pose a risk to aviation safety can benefit from the installation of aviation obst
  

  Production&Testing

   

  

  
  
  
  

FAQ:

1. Are you a manufacturer?
   Absolutely, we are a professional manufacturer with 16 years of experience.
   Our products include IP67 waterproof recessed lights, aluminum garden outdoor landscape lighting, inground buried lamp, and LED underground lights.

2. What is your main product?
   Our main products are as follows:
   LED Triproof lights/ LED Vapor Tight Lights
   LED High Bay Lights
   LED Flood lgihts
   LED Explosion Proof Lights
   LED Down Lights
   LED underwater lights (swimming pool lights, fountain lights, underwater spotlights)
   LED garden spot/spike lights
   LED inground lights

3. What is the minimum order quantity (MOQ)?
   For customized models, samples should be prepaid. We offer free customized models if the order quantity is more than 1000 pieces.

4. What are the payment options?
   We accept T/T, Western Union, Paypal. Payment terms are 50% advanced payment and 50% balance payment. Our shipping terms are EXW, FOB, and CIF, CNF and DDP

5. What is the delivery time?
   The delivery time is about 5-7 working days for samples and 20-30 working days for mass production, depending on the quantity.

6. How are the products packaged?
   Each piece is packed in an individual color box and then placed in a strong master carton.

7. Why should you choose us?
   1). We offer OEM/ODM services.
   2). We have our own design team.
   3). We offer high-quality products at reasonable prices.
   4). We have no MOQ request.
   5). Our sales team has 12 years of experience in underwater lighting.