| Customization: | Available |
|---|---|
| Type: | Low Intensity Aviation Obstruction Light |
| Emitting Color: | White |
|
Still deciding? Get samples of US$ 501/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The LED Medium Intensity Type A L865 Aviation Obstruction Light is designed specifically to mark the tops of obstacles ranging from 105 to 150 meters in height. Utilizing high-intensity CREE LEDs as its light source, it ensures high visibility during both day and night. Its unique reflector design focuses the light, providing intensity exceeding ICAO and FAA standards. This light boasts exceptional durability and performance, helping to save on energy consumption and maintenance costs.
· Power supply available in DC(12V, 24V, 48V) or AC(110-240VAC)
Physical
· Unique design and UV protected polycarbonate reflector for converging light
· UV protection Powder coated bright yellow color base make better visibility
· Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection
· Pressure equalizing valve installed under the base to make sure the air could go through but water is avoid, so that the whole light temperature won't be high to avoid the moist air enter due to pressure and temperature difference.
System design
· Built-in photocell for day/night operation(dusk to dawn operation)
· Surge and lightning protection
Optional
· Dry contact Alarm output for remote monitoring
· GPS synchronization· Infrared LED for pilot using NVG
· ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium Intensity Type A Obstruction Light.
· FAA L-865
MF-MI-A2 medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is between 105-150 meters, and most time work with low intensity lights & medium intensity type B light installed on the lower place.
The LED Medium Intensity Type A L865 Aviation Obstruction Light is suitable for the following scenarios:
1. High-rise Buildings: Installed to mark the tops of high-rise buildings for safe passage of aircraft.
2. Telecommunication Towers: Used to mark telecommunication facilities and provide nighttime navigation.
3. Wind Turbines: Mounted on the tops of wind turbines to prevent collisions with aircraft.
4. Oil Drilling Rigs: Installed at the tops of oil drilling rigs to ensure aircraft avoidance.
5. Bridges: Used to mark bridge structures, providing guidance for aircraft navigation.
6. Beacon Towers: Marks the tops of beacon towers, ensuring safe navigation at sea.
7. Solar Panel Racks: Installed on solar panel racks to prevent collisions with aircraft.
8. Industrial Chimneys: Used to mark industrial chimneys for safe aircraft passage.
| Specifications | |
| Light Source | CREE high intensity LED |
| Available Colors | White (other color is optional) |
| Intensity(cd) | ≥20,000cd(daytime), ≥2,000cd (night) |
| Horizontal Output(degree) | 360 |
| Vertical Divergence(degree) | 3 |
| Flash Characteristics | 20-60 flashes per minute(factory setting: 20fpm) |
| Operation Mode | 24 hours operation, 2 different modes |
| LED Life Experience | >100,000 |
| Electrical Characteristics | |
| Operating Voltage | DC(12V, 24V, 36V, 48VDC)&AC(110-240VAC) |
| Power(W) | 600 |
| Lighting surge | IEC61000-4-5 L-N ±3kV IEC61000-4-5 L-PE ±6kV IEC61000-4-5 N-PE ±6kV |
| Electrostatic | IEC61000-4-2 CONTACT DISCHARGE 8kV |
| Circuit Protection | Integrated |
| Physical Characteristics | |
| Body Material | UV protected Polycarbonate |
| Base Material | Power-coated Die-casting aluminum |
| Mounting | 190*190*12 |
| Dimension(mm) | 229*229*168 |
| Weight(kg) | 3 |
| Product Life Expectancy | 5 years plus |
| Environmental Factors | |
| Ambient Temperature | -40~65 |
| Storage Temperature | -55~70 |
| Humidity | 10%-95%RH (No condensation) |
| Wind Speed | 240km/h |
| Waterproof | IP66 |
| Compliance | |
| ICAO | Annex 14 Volume 1,'Aerodrome Design and Operations' Seventh edition July 2016, table 6.3 Low-intensity Type A/B/E Obstacle Light |
| FAA | L-865 |
| Options Available | Flashing rate NVG(Night Vision Goggles) compatible LED GPS sync flashing RS485 communication Bird deterrent spike |
| Model | Power input | Flash rate | Photocell | Dry contact alarm | GPS sync flashing | Control |
| MF-MI-A2 | 110-240Vac 12Vdc 36Vdc 48Vdc |
20FPM 30FPM 60FPM 40FPM Steady |
Built-in Photocell No Photocell |
Np Alarm Alarm |
No sync GPS SNYC |
Used alone Used with controller |
The LED Medium Intensity Type A L865 Aviation Obstruction Light is a high-performance, durable product designed to mark structures ranging from 105 to 150 meters in height. Its advanced LED technology, weather-resistant materials, and intelligent design make it an indispensable device in the field of aviation safety. Whether in urban high-rises, industrial facilities, or wind farms, this light offers excellent adaptability and reliability, providing strong support for aviation safety.
Ming Feng Lighting Co., Ltd. is a leading LED lighting manufacturer with its own factory. Our company specializes in the design, production, and distribution of high-quality LED lighting products. With years of experience in the industry, we have established a reputation for excellence and innovation in LED lighting technology. Our team of skilled professionals is dedicated to providing customers with the best LED lighting products and services. At Ming Feng Lighting Co., Ltd., we pride ourselves on our commitment to quality and customer satisfaction. Whether you are looking for residential or commercial LED lighting solutions, we have the expertise and resources to meet your needs.
Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.
Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.
Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.
Q5: How long time to ship the goods if place an order?
A5: Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.
){kind=link}