| Customization: | Available |
|---|---|
| Type: | Medium Intensity Aviation Obstruction Light |
| Emitting Color: | Red |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Light source
|
LED
|
|
Available Colorsr
|
Red(Other color is optional)
|
|
Light intensity
|
32.5cd(type B)/10cd(typeA)
|
|
Flashing rate
|
Steady-burning/20/30/60 adjustable
|
|
Working mode
|
Main & Stand by(other modes as optional)
|
|
Body Material
|
Polycarbonate
|
|
Base Material
|
Die-casting aluminum
|
|
Working voltage
|
AC(110-240V)/DC12V/DC24V/ DC48V
|
| Specifications | |
| Light Source | LED |
| Available Colors | Red (other color is optional) |
| Intensity(cd) | ≥32.5cd(type B), OTHER OPTIONA |
| Horizontal Output(degree) | 360 |
| Vertical Divergence(degree) | ≥10 |
| Flash Characteristics | Steady-burning/20/30/60 adjustable |
| Working Mode | Main & stand by (other modes are optional) |
| Operation Mode | Dusk-to-dawn Automatically as standard. 24 hours operation as option. |
| LED Life Experience | >100,000 |
| Electrical Characteristics | |
| Operating Voltage | DC(48VDC)&AC(110-240VAC) or others |
| Power(W) | 5 |
| Lighting surge | IEC61000-4-5 L-N ±3kV IEC61000-4-5 L-PE ±6kV IEC61000-4-5 N-PE ±6kV |
| Electrostatic | IEC61000-4-2 CONTACT DISCHARGE 8kV |
| Circuit Protection | Integrated |
| Physical Characteristics | |
| Body Material | Polycarbonate |
| Base Material | Die-casting aluminum |
| Mounting | 3/4 inch pipe thread or D140mm*M10*3 |
| Dimension(mm) | 254*90*210 or 254*165*250 |
| Weight(kg) | 1.5 or 2 |
| Product Life Expectancy | 10 years plus |
| Environmental Factors | |
| Ambient Temperature | -40~65 |
| Storage Temperature | -55~70 |
| Humidity | 10%-95%RH (No condensation) |
| Wind Speed | 240km/h |
| Waterproof | IP66 |
| Compliance | |
| ICAO | Annex 14 Volume 1,'Aerodrome Design and Operations' Seventh edition July 2016, table 6.3 Low-intensity Type A/B/E Obstacle Light |
| FAA | L-810 |
| Options Available | NVG(Night Vision Goggles) compatible LED Working mode GPS sync flashing Dry contac output Solar Power system |
The MF-LI-B2-D LED Low-intensity Double Aviation Obstruction Light is designed for marking obstacles to ensure aviation safety, particularly for structures with heights not exceeding 45 meters. Below are its key application scenarios:
1. High-rise Buildings
Installed on rooftops to alert pilots of tall buildings in urban or suburban areas, especially those near flight paths or airports.
2. Telecommunication Towers
Marks GSM, microwave, TV, and other communication towers to prevent collisions with low-flying aircraft.
3. Wind Turbines
Used on wind farms to highlight turbine structures, ensuring visibility for pilots during both day and night operations.
4. Industrial Chimneys & Smoke Stacks
Mounted on top of chimneys in industrial zones to comply with aviation safety regulations.
5. Construction Equipment (e.g., Tower Cranes)
Temporary installation on cranes at construction sites to warn aircraft of tall, movable obstacles.
6. Utility Poles & Transmission Towers
Marks high-voltage power lines or utility poles in areas where they pose a potential hazard to low-altitude flights.
7. Offshore Structures
Suitable for oil rigs, lighthouses, or other marine installations requiring obstruction lighting.
|
Model
|
Power input
|
Light source
|
Flash rate
|
Lens color
|
Photocell
|
Dry
contact
Alarm
|
GPS sync
flashing
|
Control
|
|
MF-LI-
B2-D
|
110-240Vac&48Vdc
12VDC
36VDC
|
LED
IR
|
Steady
20FPM
30FPM
60FPM
40FPM
|
Red
Clear
|
Built-in
No
|
Built-in
No
|
NO SYNC
GPS SNYC
|
Used alone
Used with controller
|
Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.
Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.
Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.
Q5: How long time to ship the goods if place an order?
A5: Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.
){kind=link}