High Quality IP66 LED Low Intensity Aircraft Warning Red Beacon Double Heads Aviation Obstruction Warning Light for High-Altitude Buildings and Bridges

• Customization: Available
• Power: 100W
• Usage: Mine, Gymnasium, Shipyard, Exhibition, Warehouse, Shopping Mall, Factory, Tunnel
• Model NO.: MF-LI-B2-D
• Certification: CCC, CE, ETL, FCC, RoHS, SAA
• Beam Angle: 120°
• LED Chips: CREE
• Available Colors: Red
• Input Voltage: 100-240VAC
• Horizontal Output: 360
• Lighting Surge: IEC61000-4-5 L- N ±3kv
• Operation Temp.: -40°-+50°
• Warranty: 5 Years
• Mounting: 3/4 Inch Pipe Thread or D140mmxm10*3
• IP: 66
• Product Life Expectancy: 10 Years
• Wind Speed: 240km/H
• Transport Package: Standard Carton Box
• Trademark: MF
• Origin: China
• HS Code: 940542900
• Production Capacity: 10, 000PCS/Months

Product Description

High Quality IP66 LED Low Intensity  Aircraft Warning Red Beacon  Double Heads Aviation Obstruction Warning Light for High-Altitude Buildings and Bridges

Product Description

Parameter

Electrical Characteristics
Operating Voltage	DC(48VDC) &AC(110-240VAC) or others
Power(W)	5
Lightning Surge	IEC61000-4-5 L- N ±3kV IEC61000-4-5 L- PE ±6kV IEC61000-4-5 N- PE ±6kV IEC61000-4-2 Contact discharge 8kV
Circuit Protection	Integrated
Physical Characteristics
Body Material	Polycarbonate
Base Material	Die-casting aluminum
Mounting	3/4 inch pipe thread or D140mm×M10*3
Dimension(mm)	254×90×210 or 254×165×250
Weight(kg)	1.5 or 2
Product Life Expectancy	10 years plus
Environmental Factors
Ambient Temperature(ºC)	-40~65
Storage temperature(ºC)	-55~70
Humidity	10%-95%RH(No condensation)
Wind Speed	240Km/h
Waterproof	IP66
Light Characteristics
Light Source	LED
Available Colors	Red(Other color is optional)
Intensity(cd)	≥32.5cd(type B),others optional(10cd, 100cd,etc)
Horizontal Output(degrees)	360
Vertical Divergence(degrees)	≥10
Flash Characteristics	Steady-burning/20/30/60 adjustable
Working Mode	Main & stand by(other modes are optional)
Operation Mode	Dusk-to-dawn Automatically as standard. 24hours operation as option.
LED Life Experience(hours)	>100,000
Compliance
ICAO	Annex 14 Volume 1,'Aerodrome Design and Operations' Seventh edition July 2016, table 6.3 Low-intensity Type A/B/E Obstacle Light
FAA	L-810
Options Available
NVG(Night Vision Goggles) compatible LED Working mode GPS sync flashing Dry contac output Solar Power system

Features

• Utilizes CREE LED to ensure consistent brightness over extended use, providing a longer service life.
• Supports dual power inputs of DC48V and AC110-240V, adaptable to various power supply environments, and offers a broader range of applications.
• Equipped with bird deterrent spikes on the top to safeguard the device from potential damage caused by birds.
• Features a uniquely designed PMMA lens for light convergence and excellent transparency, enhancing the focusing effect and light transmission rate.
• The highly translucent and UV-resistant polycarbonate housing prevents yellowing for 3-5 years, offering better weather resistance and UV protection.

 

• The base is powder coated in bright yellow aluminum for improved visibility and durability, making the device more easily detectable in harsh environments.
• The base is made of die-cast aluminum, offering strong corrosion resistance, shock, and vibration protection for higher durability and stability.
• Features a 3/4-inch thread hole for easy pole installation, providing a convenient installation method.
• A screw-free fixing design allows the cover to be securely fastened by simply twisting, making the device easier to maintain.

 

Electrical

1.High brand LED, make sure LED keep bright while use for long time

2.Power supply in DC(48V)& AC(110-240VAC), the light could work normally when input 48VDC/110VAC/240VAC
 

Physical

1.Bird deterrent spike on top

2.Unique designed PMMA lens for converging light and good transparency

3.High translucency and anti-UV polycarbonate cover could use 3-5years without yellowing

4.UV protection Powder coated bright yellow color base make better visibility and also long life in harsh environments()

5.Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection

6.3/4inch thread hole make pole installation easy

7.No screw fix type - just twist, the cover will be fixed tightly
 

System design

1.Built-in photocell for day/night operation(dusk to dawn operation, automatically turn on when background luminance is below

50cd/m2

2.Steady/20FPM/30FPM/60FPM DIP switches on PCB

3.Surge and lightning protection

4.Main-standby mode, when the main light fail, the standby light automatically switch on to ensure the obstacle is always clearly

marked.
 

Optional

1.Infrared LED for pilot using NVG

2.Alarm contact output (Dry contact- NO COM NC), When powerfailed alarm generate & also when LED fails alarm generated

3.Solar power system

Dimension

Standard type

Installation

Configuration

Model	Power input	Light source	Flash rate	Lens color	Photocell	Dry contact Alarm	GPSsync flashing	Control
MF-Ll-B2	110-240Vac&48Vdc 12VDC 36VDC	IR	Steady 20FPM 30FPM 6OFPM 40FPM	Red Clear	Built-in No	No Alarm Alarm	No SYNC GPS SNYC	Used alone Used with controller

Application

1.Tall Structures: Aviation obstruction lights are used to mark tall structures such as communication towers, skyscrapers, chimneys, and bridges, alerting pilots to their presence and preventing potential collisions.
2.Wind Turbines: Wind farms consist of multiple turbines, and each turbine is equipped with aviation obstruction lights to ensure their visibility to aircraft, especially during low-visibility conditions or at night.
3.Airports: These lights are crucial at airports to mark various structures, including control towers, hangars, runway lighting systems, and other buildings or equipment that may pose a potential hazard to aircraft.
4.Power Transmission Lines: Aviation obstruction lights are installed on power transmission towers and lines to ensure their visibility, preventing aircraft from coming into contact with the electrical infrastructure.
5.Helipads and Heliports: Helipads and heliports utilize aviation obstruction lights to mark their locations and guide helicopter pilots during takeoff, landing, and maneuvering procedures.
6.Construction Sites: Temporary structures like cranes, tall buildings under construction, and other obstacles at construction sites require aviation obstruction lights to ensure aircraft are aware of their presence and maintain a safe distance.
7.Offshore Installations:Oil rigs, offshore wind farms, and other offshore installations utilize these lights to mark their structures, ensuring the safety of aircraft operating in the vicinity.
8.Radio and TV Broadcast Towers: Broadcasting towers are equipped with aviation obstruction lights to ensure their visibility to aircraft, preventing potential collisions.
9.Mountainous Areas: Aviation obstruction lights are installed on mountains or hills to mark their presence to aircraft, aiding navigation and preventing accidents in challenging terrain.
10.Any other tall structures or obstacles that may pose a risk to aviation safety can benefit from the installation of aviation obst

Production&Testing

 

Certifications

Company Profile

Ming Feng Lighting Co., Ltd. is a leading LED lighting manufacturer with its own factory. Our company specializes in the design, production, and distribution of high-quality LED lighting products. With years of experience in the industry, we have established a reputation for excellence and innovation in LED lighting technology. Our team of skilled professionals is dedicated to providing customers with the best LED lighting products and services. At Ming Feng Lighting Co., Ltd., we pride ourselves on our commitment to quality and customer satisfaction. Whether you are looking for residential or commercial LED lighting solutions, we have the expertise and resources to meet your needs.

 

FAQ

Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.

Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.

Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.

Q5: How long time to ship the goods if place an order?
A5:  Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.