| Customization: | Available |
|---|---|
| Type: | Medium Intensity Aviation Obstruction Light |
| Emitting Color: | White&Red |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This LED Medium-intensity Red&White Dual Aviation Obstruction Light flashing white color at daytime and red color at night. It's designed for marking top of obstacle which height is between 45-150 meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption.
· Power supply available in DC(12V, 24V, 48V) or AC(110-240VAC)
Physical
· Unique design and UV protected polycarbonate reflector for converging light
· UV protection Powder coated bright yellow color base make better visibility
· Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection
· Special valve installed under base to make sure the air could go through but water is avoid, so that the whole light temperature won't be high, to avoid the high pressure steam goes inside.
System design
· Built-in photocell for day/night operation(dusk to dawn operation)
· Surge and lightning protection
Optional
· Dry contact Alarm output for remote monitoring
· GPS synchronization· User adjustable flashing rate(20, 30, 40, 60 flashes/minute)
· ICAO Annex 14 Volume 1, Seventh edition, 2018, table 6.3 Medium Intensity Type A, Medium intensity Type B/C Obstruction Light.
· FAA L-864 & FAA L-865
MF-MI-BF medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is between 45-150 meters, and most time work with low intensity lights installed on the lower place.
The LED Medium Intensity Type A L865 Aviation Obstruction Light is suitable for the following scenarios:
1.Tall Structures: Aviation obstruction lights are used to mark tall structures such as communication towers, skyscrapers, chimneys, and bridges, alerting pilots to their presence and preventing potential collisions.
2.Wind Turbines: Wind farms consist of multiple turbines, and each turbine is equipped with aviation obstruction lights to ensure their visibility to aircraft, especially during low-visibility conditions or at night.
3.Airports: These lights are crucial at airports to mark various structures, including control towers, hangars, runway lighting systems, and other buildings or equipment that may pose a potential hazard to aircraft.
4.Power Transmission Lines: Aviation obstruction lights are installed on power transmission towers and lines to ensure their visibility, preventing aircraft from coming into contact with the electrical infrastructure.
5.Helipads and Heliports: Helipads and heliports utilize aviation obstruction lights to mark their locations and guide helicopter pilots during takeoff, landing, and maneuvering procedures.
6.Construction Sites: Temporary structures like cranes, tall buildings under construction, and other obstacles at construction sites require aviation obstruction lights to ensure aircraft are aware of their presence and maintain a safe distance.
7.Offshore Installations:Oil rigs, offshore wind farms, and other offshore installations utilize these lights to mark their structures, ensuring the safety of aircraft operating in the vicinity.
8.Radio and TV Broadcast Towers: Broadcasting towers are equipped with aviation obstruction lights to ensure their visibility to aircraft, preventing potential collisions.
9.Mountainous Areas: Aviation obstruction lights are installed on mountains or hills to mark their presence to aircraft, aiding navigation and preventing accidents in challenging terrain.
10.Any other tall structures or obstacles that may pose a risk to aviation safety can benefit from the installation of aviation obstuction light.
| Specifications | |
| Light Source | CREE high intensity LED |
| Available Colors | White(Daytime), Red (Night) |
| Intensity(cd) | ≥20,000cd(daytime) ≥2,000cd (night) |
| Horizontal Output(degree) | 360 |
| Vertical Divergence(degree) | 3 |
| Flash Characteristics | 20-60 flashes per minute(factory setting: 20fpm) |
| Operation Mode | Dusk-to-dawn automatically as standard 24 hours operation as option |
| LED Life Experience | >100,000 |
| Electrical Characteristics | |
| Operating Voltage | DC(12V, 24V, 36V, 48VDC)&AC(110-240VAC) |
| Instantaneous Power(W) | 40W (Red mode)+600W(White mode) |
| Average Power(W) | 5W (20FPM, red mode)+13W (20FPM, White mode) |
| Circuit Protection | Integrated |
| Physical Characteristics | |
| Body Material | UV protected Polycarbonate |
| Base Material | Power-coated Die-casting aluminum |
| Mounting | 190*190*12 |
| Dimension(mm) | 236*236*215 |
| Weight(kg) | 4 |
| Product Life Expectancy | 10 years plus |
| Environmental Factors | |
| Humidity | 0%-100% |
| Wind Speed | 80m/s |
| Waterproof | IP66 |
| Compliance | |
| ICAO | Annex 14 Volume 1,'Aerodrome Design and Operations' Eight edition 2018, table 6.3 Medium-intensity Type A White Obstacle Light Medium-intensity Type B/C Red obstacle light |
| FAA | L-865, L-864 |
| Options Available | GPS sync flashing Infrared LED compatible for NVG (Night Vision Goggles) Dry contact alarm output RS485 communication Bird deterrent spike |
| Model | Light Source | Power input | Flash rate | Photocell | Dry contact alarm | GPS sync flashing | Control |
| MF-MI-BF | LED IR LED&IR |
110-240Vac 12Vdc 36Vdc 48Vdc |
20FPM(Type B&A) 30FPM(Type B&A) 60FPM(Type B&A) 40FPM(Type B&A) Fixed(Type C&A) |
Built-in Photocell No Photocell |
NO Alarm Alarm |
No sync GPS SNYC |
Used alone Used with controller |
Ming Feng Lighting Co., Ltd. is a leading LED lighting manufacturer with its own factory. Our company specializes in the design, production, and distribution of high-quality LED lighting products. With years of experience in the industry, we have established a reputation for excellence and innovation in LED lighting technology. Our team of skilled professionals is dedicated to providing customers with the best LED lighting products and services. At Ming Feng Lighting Co., Ltd., we pride ourselves on our commitment to quality and customer satisfaction. Whether you are looking for residential or commercial LED lighting solutions, we have the expertise and resources to meet your needs.
Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.
Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.
Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.
Q5: How long time to ship the goods if place an order?
A5: Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.
){kind=link}