Features
*Light source:1pcs 150W white LED + laser( red 100mw , green 30mw)
*Power consumption:160W
*Beam Angle:13.5 degree
*Electronic dimmer 0~100%
*Pan movement:540°
*Tilt movement:270°
*Pan/Tilt resolution:8-16bit
*Prism rotating 5-facet prism
*Focus:linear focus from close to far
*1 fixed gobo wheel: 8gobos plus blank
*1 rotated gobo wheel: 6gobos plus blank,gobo rotating 360°
*1 color wheel:7colors plus white
*Strobe:0-16Hz, from slow to fast, adjusting
*Control mode:Auto, sound active , DMX512
*DMX channel:16CH
* LCD display
*Pan/Tilt invert option
*Reset to factory settings option.
*Fan Cooling /Forced convection
Technical specifications
DMX Channel
Installation Instructions
Set up
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
3.1 Fuse replacement
With a flat head screwdriver wedge the fuse hold out of its housing. Remove the damaged fuse from its holder and replace with exact
same type fuse. Insert the fuse holder back in its place and reconnect power.
3.2 Fixture linking
You will need a serial data link to run light show of one or more fixtures using a DMX-512 controller or to run synchronized on two or
more fixtures set to a master/slave operating mode. The combinednumber of channels required by all the fixtures on a serial data link
determines the number of fixtures the data link can support.
3.3
3-Pin to 5-Pin conversion chart
Note! If you use a controller with a 5 pin DMX output connector. You will need to use a 5pin to 3 pin as apter CHA-UVET Model No: DMX5M. Or DMX 5F The chart below details a proper cable conversion:
3.4 Setting up a DMX serial data link
At first link the first light and DMX control through XLR-connection signal cable, then connect the light in series, as the follow:
. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3pin connector of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the
next fixture consisting of a (male) 3 pin connector. Then, proceed to connect from the output as stated above to the input of the
following fixture and so on.
3.5 orientations
This fixture may be mounted in any position provided there is adequate room for ventilation.
Ming Feng Lighting Co.,Ltd is one of the leading LED light product, located in Guangdong Province, China. Established in year 2009 and has more than 14 years experience in exporting LED lighting products. Ming Feng LED lighting factory produce LED Indoor Light and LED outdoor lamp. For the LED indoor light, we are producing the LED Triproof Lights, LED Vapor Tight Lights,LED down lights ,LED Flat panel, For the Outdoor LED Light, we are producing the LED flood light, LED high bay lighting, LED sports lights and some of outdoor LED landscape light.With the rapid growth of our sales volume in the market, our R&D are expanding quickly to meet the market demands.
Our main market is in European, South American and North American. Our factory locates between Shenzhen port and Guangzhou, it's convenient to visit our factory and delivery the container to all around the world based on Shenzhen port.
Ming Feng Lighting Co., Ltd warmly welcome all the partners visit our factory and share the ideas of the LED light. Ming Feng Lighting factory stays with you all the time to share the happiness of the LED light, let's work together to create an outstanding future.
HISTORY
Ming Feng Lighting Co.Ltd factory established in year 2009 and has 14 years great experience in exporting LED lighting products. We dedicate ourselves in the LED lighting area to develop the market-oriented LED light product. We are proud of that, our factory can manufacture the outstanding LED light with high quality standard.
SERVICE
Ming Feng lighting CO.,Ltd providing the OEM & ODM service for all the partners all around the world, Our LED light is in high quality standard at reasonable and competitive price, our designer and engineer help our LED light in tasteful design and excellent performance.We are able to offer our valuable clients:
★
OEM/ODM Serivce
★
Photometric/IES file
★
Dialux simulation design
★
PCB Design/Driver Design
★
Heat Management/Optical Design
★
Industry Design
★
Market Support
★
3D Printing
★
Multiple Listing/Private Label.
OUR TEAM
Ming Feng Lighting Co.Ltd has 200 employees, which include administrative staff 30 people, engineers 10, industrial designer 5, quality control department 8, and 150 people involve in production line as well warehouse and logistics department.
FAQ:
Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.
Q2: Can I order a sample of the LED Tri-proof Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.
Q3: What is the lead time for the LED Tri-proof Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.
Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).
Q5: Can I print my logo on the LED Tri-proof Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.
Q6: How do I proceed with an order for the LED Tri-proof Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.
Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.
Audited Supplier 
){kind=link}
){kind=link}