Factory Price AC100-240V 20W-300W IP66 Waterproof Outdoor Lighting Fixture with Photocell LED Parking Lot Light LED Street Road Light

• Customization: Available
• Power Supply: AC
• Color Temperature: 4000K-6500K
• Model NO.: MFSL-G9-020/030/040/050
• Lamp Body Material: Die-Casting Aluminum
• Power: 20W-300W
• Application: Square, Highway, Garden, Parking Lot
• IP Rating: IP66
• Certification: CB, DLC, CE, ETL, RoHS, SAA, TUV, Ence
• Input Voltage: AC100~240V 50/60Hz
• LED Chips Brand: Lu-Miled 3030
• CRI: 70+
• Lifespan: 60,000
• Lumens: 140lm/W
• Beam Angle: 160°/85° 160°/95°
• Driver: Sosen
• Operating Temperature: -30°c to+60°c
• Storage Temperature: -30°c to+50°c
• Frequency: 47~63Hz
• Trademark: MF
• Origin: China
• HS Code: 9405429000
• Production Capacity: 10, 000PCS/Months

Product Description

20W-300W IP66 IK08 4000-6500K AC100-240V Owl-2 Family LED Street Light for Highway/Street/Roadside
 

Product Description

Quick Details

1. IP66 20W-300W LED Street Light
2. Input: AC100-240V 50-60Hz
3. Beam Angle: 160°/85°, 160°/95°
4. CCT: 4000K-6500K
5. Warranty: 5 years
6. Lifespan: >=60,000Hrs

Parameters

Power Consumption	20W	30W	40W	50W	60W	75W
Instant Output Lumen	2800 lm	4200 lm	5600 lm	7000 lm	8400 lm	10500 lm
LED Quantity	40 pcs	64 pcs	80 pcs	96 pcs	96 pcs	112 pcs
Power Consumption	100W	120W	150W	180W	200W	240W
Instant Output Lumen	14000 lm	16800 lm	21000 lm	25200 lm	28000 lm	33600 lm
LED Quantity	114 pcs	192 pcs	192 pcs	224 pcs	288 pcs	336 pcs
Types Typical System	140 lm/w(after PC Lens)
LED Chip	Lu-miled 3030

 

Power Consumption	20W	30W	40W	50W	60W	75W
Instant Output Lumen	3000 lm	4500 lm	5800 lm	7000 lm	9300 lm	11250 lm
LED Quantity	96 pcs	96 pcs	96 pcs	96 pcs	160 pcs	160 pcs
Typical System Efficiency	150 lm/w		145 lm/w	140 lm/w	155 lm/w	150 lm/w
	After PC Lens
Power Consumption	100W	120W	150W	180W	200W	240W
Instant Output Lumen	14500 lm	18600 lm	22500 lm	26100 lm	31000 lm	36000 lm
LED Quantity	160 pcs	320 pcs	320 pcs	320 pcs	480 pcs	480 pcs
Typical System Efficiency	145 lm/w	155 lm/w	150 lm/w	145 lm/w	155 lm/w	150 lm/w
	After PC Lens
LED Chip	Lu-miled 3030

 

Power Consumption	20W	30W	40W	50W	60W	75W
Instant Output Lumen	/	/	/	/	8700 lm	10500 lm
LED Quantity	/	/	/	/	160 pcs	160 pcs
Power Consumption	100W	120W	150W	180W	200W	240W
Instant Output Lumen	14000 lm	17400 lm	21750 lm	25200 lm	29000 lm	33600 lm
LED Quantity	160 pcs	320 pcs	320 pcs	320 pcs	448 pcs	448 pcs
Typical System Efficiency	140 lm/w	145 lm/w		140 lm/w	145 lm/w	140 lm/w
	After PC Lens + Tempered Glass
LED Chip	Lu-miled 3030

 

Color	WW	NW	CW	CW
CCT	3000±300K	4000±300K	5000±300K	5700±300K
Typical CRI	>=70
Beam Angle	160°/85°, 160°/95°
Material	Alloy Aluminum, Optical PC, Tempered Glass, Stainless Steel
Operating Temperature	-30°c to+60°c
Storage Temperature	-30°c to+50°c
Frequency	47 63HZ
Input Voltage	100-240V AC

Description

Ming Feng Lighting presents the IP66 LED Street Light, a high-quality lighting solution designed for efficient street and roadway illumination. With its impressive features and long lifespan, it offers reliable performance and durability.

Operating on AC100-240V at 50-60Hz, this street light is compatible with various power systems worldwide. Its 160°/85°, 160°/95° beam angle ensures uniform lighting distribution, covering a significant area and enhancing visibility.

The CCT ranges from 4000K to 6500K, allowing you to select the desired color temperature for your lighting needs. With a power factor (PF) greater than 0.95, it maximizes energy efficiency and reduces electricity costs.

Boasting a lifespan of over 60,000 hours, this LED street light ensures long-lasting operation and minimizes maintenance expenses. Its IP66 rating guarantees resistance against dust and water, making it suitable for outdoor environments.

In summary, Ming Feng Lighting's IP66 LED Street Light combines efficiency, durability, and versatility to provide outstanding illumination for streets and roadways. With its wide voltage range, adjustable color temperature, high power factor, and long lifespan, it is a reliable and energy-efficient lighting solution. Choose Ming Feng Lighting for enhanced visibility, reduced energy consumption, and low maintenance requirements.

Key Features

Installation Instructions

Wiring:

Cut off the power input (turn the switch gear to "OFF"). Connect the core wires of the power cable to the input wire of lamp correspondingly (lamp input wire: brown to the power grid L (Live line), blue to the power grid N (Neutral line), yellow-green to the power grid G (ground wire) , and wrap with fireproof insulating tape according to safety regula-tions).

 

Installation steps:
1.Screw the photocontrol onto the base (optional)
2.Fasten the hoop to the lamp body with bolts
3.Connect the cable according to the wiring diagram

4.Loosen the fastening screws, align the hoop mouth with the light pole in the direction of the arrow shown in the figure, and slowly slide the light pole to the bottom;

5.Refer to the level bubble, rotate the lamp to keep it parallel to the direction of the road, then tighten two fixing screws, and finally tighten two fastening nuts.

Remarks:

Light pole diameter can be 52mm ~ 60mm;

Horizontal or vertical installation available, ± 15 ° elevation and depression angle adjustment;

Hex wrench would be used when installing, and the tightening strength is 18Nm.

Inspection after installation:

1.Firmness, cleanliness; direction, angle.

2.The wire is not exposed and the wire sheath is not damaged.

3.Power-on inspection (air switch and other devices need to be turned to the ON position); the control system need overall adjustment; For lamps with construction errors, they need to be power off and to do re-construction.

 

Dimensions

Photometric

 

Production Line

Ming Feng Lighting manufactures LED street lights with precision and expertise. The production process begins with the careful selection of high-quality materials. Advanced manufacturing techniques are employed to ensure the efficiency and durability of the lights. 

First, the LED chips, known for their energy-saving properties, are meticulously placed on circuit boards. These boards undergo thorough testing to ensure optimal performance. 

Next, the assembled components are housed in rugged and weather-resistant casings, designed to withstand the harshest outdoor conditions. 

Quality control measures are implemented at every stage of production. Rigorous testing procedures guarantee that each LED street light meets the highest industry standards. 

Ming Feng Lighting's commitment to innovation and reliability has positioned them as a leading provider of LED street lights. Their dedication to producing top-quality products ensures long-lasting performance, energy efficiency, and customer satisfaction.
 

Applications

Ideal for highways, viaducts, urban streets, overpasses, sidewalks, squares, schools and other outdoor lighting place.

Company Profile

Ming Feng Lighting Co., Ltd. is a leading LED lighting manufacturer with its own factory. Our company specializes in the design, production, and distribution of high-quality LED lighting products. With years of experience in the industry, we have established a reputation for excellence and innovation in LED lighting technology. Our team of skilled professionals is dedicated to providing customers with the best LED lighting products and services. At Ming Feng Lighting Co., Ltd., we pride ourselves on our commitment to quality and customer satisfaction. Whether you are looking for residential or commercial LED lighting solutions, we have the expertise and resources to meet your needs.

 

FAQ

Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.

Q2: Is it OK to print my logo on led light product? 
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.

Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.

Q5: How long time to ship the goods if place an order?
A5:  Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.