| Customization: | Available |
|---|---|
| Color Temperature: | Pure White, Nature Light, Warm White |
| Lamp Body Material: | Aluminum |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Die-casting technology, ADC12 AL
with 92% purification| Power | lumen efficiency | Light color | Beam angle |
| 60W | 150lm/w | 3000K,4500K,6000K | 60°90°120° |
| 100W,150W | 150lm/w | 3000K,4500K,6000K | 60°90°120° |
| 200W | 150lm/w | 3000K,4500K,6000K | 60°90°120° |
NSF highbay light applied to food factories
The hygiene of food factories is crucial and affects the physical health of everyone. The workshops of food factories provide guarantees for the health and safety of food.
1. The food factory workshop needs simple and easy to clean lamps that are not easily dirty.
2. Wet and foggy workshops require waterproof lighting fixtures, while explosion-proof workshops require explosion-proof lighting fixtures.
3. The lighting fixtures in the dust-free workshop of the food factory need to be ceiling mounted and exposed, and the joints between the fixtures and the ceiling should be sealed. When embedded fixtures are used, the exposed installation gaps also need to be treated.
4. The UV light switch in the food factory should be set outside the workshop.
The food factory workshop should provide illumination according to the actual situation of the work, and backup lighting should be set up in the workshop to meet the required lighting for activities and operations in the place or location.
Ming Feng Lighting NSF high bay light is waterproof, dustproof, and corrosion-resistant, with a protection level of IP65, making it easy to clean.
1, The light source for clean rooms in food factories, based on the current types of light sources both domestically and internationally, is suitable for situations where the illumination in clean rooms is relatively high and the indoor ceiling is relatively low. LED lamps are commonly used as the light source. Because fluorescent lamps have advantages such as high light efficiency, long lifespan, soft light, good light color, and low surface temperature of the light source.
2, The selection of lighting fixtures for clean rooms should not only meet the illumination requirements, but also meet the following requirements.
1. To maintain air tightness, it is important to first pay attention to the construction of a structure that can isolate air circulation between the ceiling and the clean room. Secondly, when installing lamps on the ceiling surface, sealant and padding should be used to achieve sealed installation. Maintain positive or negative pressure in the clean room.
2. Anti static treatment, reflective plates of lighting fixtures and other lighting materials exposed to indoor air should use materials that are not prone to generating static electricity. Materials with low intrinsic resistance values, such as special polypropylene treated with anti-static treatment.
3. The appearance of a smooth surface with few concave and convex surfaces, protruding from the lighting fixtures installed under the ceiling, should not disrupt unidirectional airflow, and the appearance should not be prone to dust accumulation.
4. Luminaires used in semiconductor and pharmaceutical factories have good corrosion resistance. They are made of non rusting and corrosion-resistant materials that are resistant to acid, other drugs, and disinfectants. Aluminum frames that have undergone rust prevention treatment should be coated with transparent paint.
5. In some clean rooms, photosensitive films are produced and photosensitive materials are coated. In the fluorescent powder coating room in the picture tube factory and the lithography room in the semiconductor factory, yellow or red light sources must be used to prevent light falling from the photosensitive materials, or UV insulated lampshades must be used.
6. Easy to maintain, the work of replacing light tubes and cleaning lamps from indoors or in the ceiling should be easy to operate.
Selection techniques for cold storage lamps and requirements for lighting fixtures in food processing workshops
Tell everyone about the selection techniques for cold storage lights and the requirements for lighting fixtures used in food processing workshops
How to Choose Cold Storage Lights for Cold Storage Installation
Cold storage lamp is a type of lamp named after its purpose, mainly used in cold storage, cold storage, freezer and other places with relatively low and humid environmental temperatures. Safety and environmental protection should be considered when using electricity. With the development of the cold chain in recent years, cold storage has been widely used for food preservation, and specialized lighting fixtures for cold storage have become increasingly specialized.
Installing cold storage lights in a cold storage facility is an essential item. Can I choose to install general lighting in a cold storage facility? What are the benefits of installing professional cold storage lights in cold storage? What is the difference between it and regular lighting?
Cold storage light is a new type of cold storage light source, representing the future development direction of cold storage lighting technology, such as light efficiency, lifespan, color rendering, etc.
The traditional large cold storage lamps use metal halide lamps and low energy efficiency mercury lamps. The drawbacks of these lamps used in cold storage are high power, low illumination, short service life, easy air leakage, and water accumulation. Ordinary lighting fixtures cannot replace specialized lighting fixtures for cold storage.
The cold storage adopts a plasma infinite induction lamp, with a laboratory test temperature of -80 and a service life of up to 40000 to 50000 hours. The plasma lamp is a new generation of technological cold storage lighting source product that integrates electronic technology, optoelectronic technology, plasma science, magnetic material science, and vacuum technology.
So, friends, please note that no matter where the cold storage is built, special cold storage lights should be used to prevent a series of accidents such as explosions.
Requirements for lighting fixtures used in food processing workshops
Due to the low temperature and high humidity environment of cold storage, LED dedicated cold storage lights are required to have certain characteristics. Food processing, refrigeration, cold chain logistics, fresh supermarkets and other fields have special requirements for lighting. Among them, the requirements for lighting in food processing workshops are of great concern to industry colleagues.
It can be confirmed that high-temperature light sources such as explosion-proof lamps, energy-saving lamps, and incandescent lamps are not suitable for use in food processing workshops. If the heat is too high, long-term exposure to food may corrode food, especially frozen food.
On the other hand, in food processing workshops, the hygiene requirements for raw materials and finished food are very high. In fact, after years of product promotion and market guidance, LED lights are widely used for lighting in food factories, but most food factories are not aware of the different environmental requirements for lighting fixtures.
){kind=link}