60W 0-10V Dim Die-casting Aluminum Waterproof Weatherproof Smart Control Photocell highways parks square parking lots led flood light Street Light
World class brand chips, high brightness, low light decay & long life-time
International driver brand, overheat protection, high convert efficiency, high PF & surge protection, (1-10V,DALI2.0)
Die-casting technology with ADC12, excellent thermal management and balance the internal & external temperature,
reduce chip Tj and light decay.
Optial UV resistant PC lens with 94% light transimitance, IK08.
Light Distribution: 70*140°
Pole installation.
peration temperature: -35C- +50C
Color |
Warm White (WW) |
Neutral White (NW) |
Cool White (CW) |
Cool White (CW) |
Color Temperature |
3000±300K |
4000±300K |
5000±300K |
5700±3000K |
Typical CRI |
≥70 |
BeamAngle |
160"185°,160"195° |
Material |
Alloy Aluminum,Optical PC,Tempered Glass,Stainless Steel |
Operating Temperature |
-30°C~+60°ºC |
Storage Temperature |
-30°ºC~+50°ºC |
Frequency |
47~63HZ |
Input Voltage |
100~240VAC |
Power Consumption |
20W |
30W |
40W |
50W |
60W |
75W |
lnstant Output Lumen |
2800 lm |
4200 lm |
5600 lm |
7000 Im |
8400 lm |
10500 lm |
LED Quantity |
40 pcs |
64 pcs |
80 pcs |
96 pcs |
96 pcs |
112 pcs |
Power Consumption |
100W |
120W |
150W |
180W |
200W |
240W |
lnstant Output Lumen |
14000 lm |
16800 lm |
21000 lm |
25200 Im |
28000 im |
33600 lm |
LED Quantty |
114 pcs |
192 pcs |
192 pcs |
224 pcs |
288 pcs |
336 pcs |
types Typical System |
140 lm/w (After PC lens) |
LED Chip |
Lu-mileds 3030 |
Power Consumption |
20w |
30w |
40w |
50w |
60w |
75W |
Instant Output Lumen |
3000 lm |
4500 Im |
5800 Im |
7000 Im |
9300 Im |
11250lm |
LED Quantity |
96 pcs |
96 pcs |
96 pcs |
96 pcs |
160 pcs |
160 pcs |
Typical System Efficency |
150 Im/w |
145 lm/w |
140 Im/w |
155 Im/w |
150 Im/w |
After PC lens |
Power Consumption |
100w |
120w |
150w |
180W |
200w |
240W |
lnstant Output Lumen |
14500 lm |
18600 lm |
22500 lm |
26100 lm |
31000 lm |
36000 lm |
LED Quantity |
160 pcs |
320 pos |
320 pcs |
320 pcs |
480 pcs |
480 pcs |
Typical System Effidency |
145 Im/w |
155 Im/w |
150 lmlw |
145 Imlw |
155 Impcsw |
150 Imkw |
After PC lens |
LED Chip |
Lu-mileds 3030 |
Power Consumption |
20w |
30w |
40w |
50w |
60w |
75w |
lnstant Output Lumen |
/ |
/ |
/ |
/ |
8700 Im |
10500 lm |
LED Quantity |
/ |
/ |
|
/ |
160 pcs |
160 pcs |
Power Consumption |
10ow |
120w |
150w |
180w |
200w |
240W |
lnstant Output Lumen |
14000 lm |
17400 Im |
21750 lm |
25200 Im |
29000 lm |
33600 lm |
LED Quantity |
160 pcs |
320 pcs |
320 pcs |
320 pcs |
448 pcs |
448 pcs |
Typical System Efficiency |
140 Im/w |
145 Im/w |
140 Im/w |
145 Im/w |
140 Im/w |
After PC lens +Tempered glass |
LED Chip |
Lu-mileds 3030 |
Product dimension:
(20~50W) (20~240W)
(60~240W)(L1xW1xH1) (60~240W)(L2xW2xH2)
Model
MFSL-G9-020
MFSL-G9-030
MFSL-G9-040
MFSL-G8-050
MFSL-G9-060
MFSL-G9-075 |
Power |
(L1xW1xH1) |
(L2xW2xH2) |
EPA |
l*w*h(mm) |
NW |
NW(with glass) |
20w |
405x135x78.5 |
/ |
0.0546m² |
440x170x125 |
1.5KG |
/ |
30w |
405x135x78.5 |
/ |
0.0546m² |
440x170x125 |
1.5KG |
/ |
40W |
405x135x78.5 |
/ |
0.0546m² |
440x170x125 |
1.5KG |
/ |
50W |
405x135x78.5 |
/ |
0.0546m² |
440x170x125 |
1.5KG |
/ |
60w |
530x301.5x92 |
444.5x301.5x170.5 |
0.1597m² |
565x345x135 |
4.0KG |
4.5KG |
75W |
530x301.5x92 |
444.5x301.5x170.5 |
0.1597m² |
565x345x135 |
4.0KG |
4.5KG |
MFSL-G9-100
MFSL-G9-120
MFSL-G9-150
MFSL-G9-180
MFSL-G9-200
MFSL-G9-240 |
100w |
530x301.5x92 |
444.5x301.5x170.5 |
0.1597m² |
565x345x135 |
4.0KG |
4.5KG |
120W |
695x310x92 |
605.5x310×170.5 |
0.2154m² |
730x345x135 |
5.6KG |
6.6KG |
150W |
695x310x92 |
605.5x310x170.5 |
0.2154m² |
730x345x135 |
5.85KG |
6.85KG |
180W |
695x310x92 |
605.5x310x170.5 |
0.2154m² |
730x345x135 |
5.85KG |
6.85KG |
200w |
865x350x92 |
779.5x350x170.5 |
0.3027m² |
900x385x135 |
7.6KG |
9.4KG |
240W |
865x350x92 |
779.5x350x170.5 |
0.3027m² |
900x385x135 |
7.8KG |
9.4KG |
Photometry
LIGHT DISTRIBUTION CURVE
LUX LEVEL CHART
Installation Instructions
Wiring:
Cut off the power input (turn the switch gear to "OFF"). Connect the core wires of the powyer cableto the input wire of lamp correspondingly (lamp input wire: brown to the powerrid l (liye line),blue to the power grid N (Neutral line), yellow-green to the power grid G (ground wire) , and wrapwith fireproof insulating tape according to safety regula-tions).
Installation steps:
1.Screw the photocontrol onto the base (optional)2.Fasten the hoop to the lamp body with bolts3.Connect the cable according to the wiring diagram4Loosen the fastening screws, align the hoop mouth with the light pole in the direction of thearrow shown in the figure, and slowly slide the light pole to the bottom;5.Refer to the level bubble, rotate the lamp to keep it parallel to the direction of the road, thentighten two fixing screws, and finally tighten two fastening nuts.
Remarks:
Light pole diameter can be 52mm ~ 60mm;Horizontal or vertical installation available, + 15 °elevation and depression angle adjustment;Hex wrench would be used when installing, and the tightening strength is 18Nm.
Inspection after installation:
1.Firmness, cleanliness; direction, angle.
2.The wire is not exposed and the wire sheath is not damaged.3.Power-on inspection (air switch and other devices need to be turned to the ON position); thecontrol system need overall adjustment; For lamps with construction errors, they need to bepower off and to do re-construction.
Diagram of Pallet loading
20ft Container loading 40ft Container loading
Street lights are commonly used to illuminate roads, streets, highways, parks, squares, parking lots and other public places. They can provide nighttime lighting, improve visibility for pedestrians and vehicles, reduce the risk of traffic accidents, and increase public safety. In addition, street lights can also be used for:
Enhance the urban landscape: The use of street lights in cities and communities can improve the beauty of the urban landscape and night environment, and promote urban tourism and economic development.
Wildlife protection: The use of street lights in protected areas and nature reserves can improve the safety of visitors at night and reduce disturbance to wildlife.
Increase the sense of security of residents: The use of street lights in the community can increase the sense of security of residents, improve the environmental quality of the community, and reduce the crime rate.
In conclusion, street lights can be used in many different venues and applications to increase public safety and visibility, improve urban environments and landscapes, and protect wildlife and the natural environment.
FAQ:
Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.
Q2: Can I order a sample of the LED High Mast Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.
Q3: What is the lead time for the LED High Mast Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.
Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).
Q5: Can I print my logo on the LED High Mast Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.
Q6: How do I proceed with an order for the LED High Mast Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.
Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.