Product Precautions
1.This light fixture is for professional use only.
2.Ensure that the power supply voltage is consistent with the equipment requirements before running.
3.Do not place this product in a place that is easy to loosen or shake.
4.In the process of use, if the lamp appears abnormal, it should stop using the lamp in time.
5.In order to ensure the service life of the product, the product should not be placed in damp or leaking places, but also should not work in the environment where the temperature exceeds 60 degrees.
6.When the bulb is used, the voltage change of the power supply should not exceed ±10%. If the voltage is too high, the life of the bulb will be shortened. If the voltage is too low, the light color of the bulb will be affected.
7.After the power off, it takes 20 minutes to use the lamp to cool down fully before it can be used again.
8.The rotating parts of the lamps and pasting accessories must be checked regularly. If they are loose and shake, they should be reinforced in time to prevent accidents.
9.In order to ensure the normal use of this product, please read the instructions carefully
Product Introduction
Power of light source
|
150W
|
Voltage
|
AC 200V~240V/50~60Hz
|
Color disk
|
Each color disk consists of 14 color plates + white light
|
Pattern plate
|
10 gobos with 3 glasses gobos+ whiteControl mode
|
Control mode
|
DMX512/ master-slave/Automatic
|
1.540° translation, 270° tilt
2.Overheat protection
3.IP20 protection level
Installation Instructions
Signal cable connection
Light fixtures feature standard DMX input and output 3-core or 5-core XLR sockets.Use a shielded twisted-pair signal cable designed for DMX 512;The signal line is generally connected at 150 meters, and the DMX512 signal amplifier must be added for long distance signal transmission.
Connect a shielded twisted-pair signal line from the DMX outlet of the controller to the DMX input of the first device, and from the DMX outlet of the first device to the DMX input of the second device, and so on, until all lights have been connected. Then install a terminal plug on the last connected light outlet 3-core jack on each circuit.(Weld a 4/1W, 120Ω resistor between the 2 and 3 pins of the 3-core pin cannon plug).
Important: The wires should not touch each other or the metal housing.
Luminaire installation
Light fixtures can be placed horizontally, slanted, and hung upside down.Be sure to pay attention to the installation method when hanging diagonally and upside down.
As shown in Figure 2, before positioning the lamp, it is necessary to ensure the stability of the installation site. When installing the reverse hanging, it is necessary to ensure that the lamp does not fall down on the support frame. It is necessary to use the safety rope through
the support frame and the lamp handle for auxiliary hanging to ensure safety. Prevent the luminaire from falling and sliding.
When installing and debugging the lamps, it is forbidden for pedestrians to pass under them. Regularly check whether the safety rope is worn and whether the hook screws are loose.
Our company does not assume any responsibility for all consequences caused by the fall of the lamp due to the unstable installation of the hanging.
Control Panel
![Factory Price 5 Years Warranty 200W LED Stage Light Moving Head Light with DMX512 Control Mode for Nighclub Studio](//www.micstatic.com/athena/img/transparent.png)
![Factory Price 5 Years Warranty 200W LED Stage Light Moving Head Light with DMX512 Control Mode for Nighclub Studio](//www.micstatic.com/athena/img/transparent.png)
![Factory Price 5 Years Warranty 200W LED Stage Light Moving Head Light with DMX512 Control Mode for Nighclub Studio](//www.micstatic.com/athena/img/transparent.png)
![Factory Price 5 Years Warranty 200W LED Stage Light Moving Head Light with DMX512 Control Mode for Nighclub Studio](//www.micstatic.com/athena/img/transparent.png)
![Factory Price 5 Years Warranty 200W LED Stage Light Moving Head Light with DMX512 Control Mode for Nighclub Studio](//www.micstatic.com/athena/img/transparent.png)
Ming Feng Lighting Co.,Ltd is one of the leading LED light product, located in Guangdong Province, China. Established in year 2009 and has more than 14 years experience in exporting LED lighting products. Ming Feng LED lighting factory produce LED Indoor Light and LED outdoor lamp. For the LED indoor light, we are producing the LED Triproof Lights, LED Vapor Tight Lights,LED down lights ,LED Flat panel, For the Outdoor LED Light, we are producing the LED flood light, LED high bay lighting, LED sports lights and some of outdoor LED landscape light.With the rapid growth of our sales volume in the market, our R&D are expanding quickly to meet the market demands.
Our main market is in European, South American and North American. Our factory locates between Shenzhen port and Guangzhou, it's convenient to visit our factory and delivery the container to all around the world based on Shenzhen port.
Ming Feng Lighting Co., Ltd warmly welcome all the partners visit our factory and share the ideas of the LED light. Ming Feng Lighting factory stays with you all the time to share the happiness of the LED light, let's work together to create an outstanding future.
HISTORY
Ming Feng Lighting Co.Ltd factory established in year 2009 and has 14 years great experience in exporting LED lighting products. We dedicate ourselves in the LED lighting area to develop the market-oriented LED light product. We are proud of that, our factory can manufacture the outstanding LED light with high quality standard.
![Factory Price 5 Years Warranty 200W LED Stage Light Moving Head Light with DMX512 Control Mode for Nighclub Studio](//www.micstatic.com/athena/img/transparent.png)
SERVICE
Ming Feng lighting CO.,Ltd providing the OEM & ODM service for all the partners all around the world, Our LED light is in high quality standard at reasonable and competitive price, our designer and engineer help our LED light in tasteful design and excellent performance.We are able to offer our valuable clients:
★ OEM/ODM Serivce
★ Photometric/IES file
★ Dialux simulation design
★ PCB Design/Driver Design
★ Heat Management/Optical Design
★ Industry Design
★ Market Support
★ 3D Printing
★ Multiple Listing/Private Label.
OUR TEAM
Ming Feng Lighting Co.Ltd has 200 employees, which include administrative staff 30 people, engineers 10, industrial designer 5, quality control department 8, and 150 people involve in production line as well warehouse and logistics department.
FAQ
Q1: Are you a manufacturer ?
MF: Yes,we have our own factory with over 14 years R&D and manufacture experience base on ISO quality management since 2009.
Q2. Can I have a sample order for LED Tri-proof Light ?
MF: Yes, sample order to test and check quality is welcomed. Mixed samples are acceptable.
Q3. How about the lead time of LED Tri-proof Light ?
MF: 3-7 days for sample order, 15-25 days for mass production order base on order quantities.
Q4: How do you ship the finished production ?
MF:By SEA, AIR or Express(DHL,UPS,Fedex,TNT,etc) are optional.
Q5: Is it OK to print my logo on LED Tri-proof Light ?
MF:We provide OEM service to our customers, we can help to make the label and color box according to your requirements.
Q6: How to proceed an order for LED Tri-proof Light ?
MF:Firstly, please let us know your detail requirement and application environment. secondly we will recommend some suitable products and solutions to you according to your request. Thirdly, after confirm all the details, customers will issue the purchase order and make the payment to confirm, then we start for the production and arrange the shipment.
Q7: How to deal with the defective?
MF: AlI of our product are produced in strict quality control system, the defective rate is less than 0.2% according to our shipment records. We offer 5 years warranty for this product, if there is any defective during the warranty, please provide the picture or video for the working situation of the defective lights, we will ship the new lights to you within a few days or send it together with your next order.