Factory Price Wedding Light 22 27 CH Nightclub Party Event Equipment 500W LED Moving Head Spot Light

• Customization: Available
• Light Source: LED
• Material: Aluminum
• Model NO.: MF-DM500WBSW
• Strobe: Adjustable Speed Strobe
• Control Mode: Dmx Signal Control
• IP Rating: IP20
• Certification: CE, RoHS
• Voltage: AC90V-240V/50-60Hz
• Outlet Aperture: 138mm
• Lumen Illumination: 4 M 120000 Lm
• Life of Light Source: 20,000 Hours
• Horizontal Scanning: 540 Degrees
• Vertical Scanning: 270 Degrees
• Dimmer: 0-100% Linear Adjustment
• Light Power: 600W
• Trademark: MF
• Origin: China
• HS Code: 9405429000
• Production Capacity: 10, 000PCS/Months

Product Description

MF-DM500WBSW BEAM SHARPY MOVING HEAD LED STAGE LIGHT

Product Parameters

OPERATING MODE

DMX Control	DMX mode, receive DMX signal, RDM signal
Auto Run	Fixture run automatically according to built-in programs
Sound Control	When the fixture detects a strong sound, the fixture automatically runs a scene according to the built-in program, otherwise it will stay the last scene
Scene Mode 01	runs in a set scebe, which supports most of the custom editing of 10 scenes.
	1~10	outputs the specified scene
	Auto	Automatically loops the output scene in the set scene time (non-zero) order, and the scene with time 0 automatically ignore
M/S Choose	Master and slave selection, non-DMX mode takes effect, select the mode of data output, fixture detect DMX cable state automatic switch output, prevent data conflicts
	Master	Fixture runs built-in program. If DMX has no signal, it outputs data (synchronization), otherwise it does not output data.
	Slave	Fixture runs built-in program and do not output data
	Auto	If DMX has no signal, the fxiture will runs built-in program. Otherwise, the fixture will run in DMX Mode(follow DMX).
Lamp Switch	(Lamp light source) pop-up confirmation dialog box, select "SURE" to confirm the current operation, turn on or off the lamp, switch time interval limited to 30 seconds
	Off	The current lamp output is off
	On	The current lamp output is turned on

DISPLAY SETTING

Language	Display language settings
	English	English display
	Chinese	Chinese display
Screen Saver	Set screen 30 seconds without operation, the screen's display content or method.
	OFF	Keep the last operation page
	Mode1	Black
	Mode2	Black screen, showing the address code of the current fixture in the lower left corner.
	Mode3	Display trademark information, address code and operation mode.
Screen Rot	Set the display direction of the screen.
	OFF	No reverse display
	ON	Reverse display
DMX Indicate	Set the indication mode of DMX signal indicator.
	Mode1	When signal is bright, no signal is off.
	Mode2	When signal is off, no signal is bright.
	Mode3	When signal is flash, no signal is off.
Screen Light	Set the screen backlight for 10 seconds without operation
	1~10	10

Installation Instructions

CABLE CONNECTION DMX

Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24AWG, low capacity. Do not use microphone cable or other cable withcharacteristics differing from those specified. Theendconnections must be made using XLR type3 or 5-pin male/female connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4W)between terminals 2 and 3.

IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the shield braid and to pin 1 of the connectors.

RIGGING(OPTIONAL)

This equipment can be positioned and fixed by clamp in every direction of the stage. Locking system makes it easy to fasten to the bracket.

Attention! Two clamps is needed to fix the equipment. Every clamp is locked by fastener of 1/4 kind. Fastener can only be locked clockwise.

Attention! Fasten a safety string to the additional hole of side aluminum piece. The secondary accessory can not hang on the delivery handle. Nip the equipment on bracket.

 

Check if rigging clamp (not including the one inside) damaged or not? If stand ten times weight as the equipment. Make sure the architecture can stand ten times weight as all the equipments, clamps, wirings and other additional fixtures.

 

Screws for clamping must be fixed firmly. Take one M12 screw (Grade 8.8 or higher) to clamp bracket, and then screw the nuts.

 

Level the two hanging points at the bottom of clamp. Insert fastener to the bottom, lock the two levers by 1/4 rotating clockwise; then install another clamp.

 

Install on safety string which stands at least ten times weight as equipment. Terminal of the accessory is designed for clamps.

 

Make sure pan/tilt lock unlocked or not. Keep the distance more than 1M from equipment to flammable material or lighting source.

 

Panel Operation

BRIEF
The light panel diagram show as Figure 3, above area is fixture description, below area show fixture real-time status, such as DMX cable status, lamp status, error or information(ps. when there are message hav't been checked, echo 'ERR' in status bar, otherwise echo 'NOR'). Display & operation just like 'Android operation system', when select or set item value, system save the settting immediately. RDM protocol is embed in fixture, user set DMX address via cable using the controller surpport RDM function. when fixture was search by controller, displayer will echo 'RDM' indicate this RDM is work.
OPERATION
Operate fixture with touch or encoder/button
The left area is TFT Displayer and touch(product which support touch), chick item or value with finger will to complete operation of set light setting(parameters) or view light state.

The area on the right hand side is rotary encoder with button or key, As auxiliary input interface, if fixture disable touch function, the encoder/key can been choose to set or view the item, and then press the encoder button/key to confirm the selection, rotary

encoder or push key again set the parameter value, finally, Press encoder button/key one again to save value or setting.

Parameter value setting

When the selected item is value need to been modified, the dialog shown in Figure 4 will pop up.

Modify value:Can quickly modify value via pull the slider to the desired position, or click the button of 'up' or 'down' whit finger on the right side to set the exact desired value, another way is roll encoder on the right hand side of panel.

Apply value:When Value had been modified, Then press the bottom of 'apply' in the left corner to apply to the light, but haven't saved;

Save Value:Any time, click on the lower right corner of the "OK" button, the setting will been saved into internal memory.

Boolean parameter setting

when the selected parameters is a Boolean value (such as ON or OFF), can directly modify setting by chick corresponding item, the setting will been saved right now.
 

When the parameter is a key item, chick corresponding item, a dialog shown in Figure 5 will been popup ask for the confirm. Chick 'sure' to confirm.

Sub Menu(Parameter)

Detailed Photos

 

 

Packaging & Shipping

PACKING LIST

Product Name	Quantity
Moving Head Light	1 PCS
Power-line	1 BASE
User Manual	1 PCS

UNPACKING INSTRUCTIONS
On receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are presented, and have been received in a good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows, sign of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture should be returned in original factory box and packing.

SAFETY INSTRUCTIONS
Please read these instructions, it includes important information about the installation, usage and maintenance of this product. 

Please keep this user guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.

Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.

Before the first time to use it, Please check whether the damage in transit, if happen damages in transit, please do not use this lamp, and please asap contact distributors or manufacturers.

Please don't install the lamp in the ordinary combustible material on the surface.

Lamp should be installed in the well ventilated place, and the distance of the wall to keep it over 10 cm, at the same time, please check the fan hole was clear.

Do not use lamp direct project in flammable objects, lamp and the radiation of the distance between the objects please keep it over 12 m.

Do not use direct lamp project light source , to avoid damage the eyes. Before installation, please make sure your use power supply voltage and marked voltage

Note: before any install, maintain and clean lamp, please confirm cut off the power supply

SHIPPING

Where to Use

Company Profile

Ming Feng Lighting Co., Ltd. is a leading LED lighting manufacturer with its own factory. Our company specializes in the design, production, and distribution of high-quality LED lighting products. With years of experience in the industry, we have established a reputation for excellence and innovation in LED lighting technology. Our team of skilled professionals is dedicated to providing customers with the best LED lighting products and services. At Ming Feng Lighting Co., Ltd., we pride ourselves on our commitment to quality and customer satisfaction. Whether you are looking for residential or commercial LED lighting solutions, we have the expertise and resources to meet your needs.

FAQ

Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.

Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.

Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.

Q5: How long time to ship the goods if place an order?
A5:  Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.