Medium-intensity Photocell Red&White Dual Aviation Obstruction Light Flashing Light Waterproof Tower Light AWL Aircraft Warning Light Aviation Obstruction Light
This LED Medium-intensity Red&White Dual Aviation Obstruction Light flashing white color at daytime and red color at night. It's designed for marking top of obstacle which height is between 45-150 meters.
Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption..
Model |
Power input |
Light source |
Flash rate |
Lens color |
Photocell |
Dry contact Alarm |
GPS sync flashing |
Control |
MF-MI-BF |
110-240Vac&48Vdc
12Vdc
36Vdc
48Vdc |
LED
IR
LED&IR |
20FPM (Type B&A)
30FPM (Type B&A)
60FPM (Type B&A)
40FPM (Type B&A)
Fixed (Type C&A) |
Clear |
Built-in/
No |
No Alarm/
Alarm |
NO SYNC/
GPS SNYC |
Used alone/
Used with controller |
Light Characteristics
Light Source : CREE high intensity LED
Available Colors : White (Daytime); Red (Night)
Intensity(cd) : ≥20000cd (Daytime)
≥2000cd(Night)
Horizontal Output(degrees) : 360
Vertical Divergence(degrees) : 3
Flash Characteristics : 20-60 flashes per minute(factory setting: 20fpm)
Operation Mode : Dusk-to-dawn Automatically as standard.
24hours operation as option
LED Life Experience(hours) :>100,000
Electrical Characteristics
Operating Voltage : DC(12V, 24V, 36V, 48V) or AC(110-240VAC)
Instantaneous power(W) : 40W (Red mode)+600W(White mode)
Average Power(W) : 5W(20fpm, red mode) + 13W(20fpm, white mode)
Circuit Protection : Integrated
Physical Characteristics
Body Material : UV protected Polycarbonate
Base Material : Powder-coated Die-casting aluminum
Mounting : 190×190×θ12
Dimension(mm) : 236×236×215
Weight(kg) : 4
Product Life Expectancy : 10 years Plus
Environmental Factors
Humidity : 0%-100%
Wind Speed : 80m/s
Waterproof : IP66
Compliance
ICAO
Annex 14 Volume 1,'Aerodrome Design and
Operations' Eight edition 2018, table 6.3
Medium-intensity Type A White Obstacle Light
Medium-intensity Type B/C Red Obstacle Light
FAA
L-865, L-864
Options Available
GPS sync flashing
Infrared LED compatible for NVG (Night
Vision Goggles)
Dry contact alarm output
RS485 communication
Bird deterrent spike
Compliance
ICAO Annex 14 Volume 1, Eight edition, 2018, table 6.3 Medium
Intensity Type A, Medium Intensity Type B/C Obstruction Light
FAA L-865 & FAA L-864
Electrical
CREE ultra high intensity LED as light source saving power consumption and maintenance than incandescent light or halogen lamp
Power supply available in DC(12V, 24V, 48V) or AC(110-240VAC)
Physical
Unique design and UV protected polycarbonate reflector for converging light
UV protection Powder coated bright yellow color base make better visibility
Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection
Special valve installed under base to make sure the air could go through but water is avoid, so that the whole light temperature won't be high,avoid the High pressure steam goes inside.
System design
Built-in photocell for day/night operation(dusk to dawn operation)
Surge and lightning protection.
Optional
Dry contact Alarm output for remote monitoring
User adjustable flashing rate(20, 30, 40, 60 flashes/minute)
GPS synchronization
Installation Instructions
Flat surface mounting is optional
(Mounting bracket is charged separately, and size is customized) Wiring diagram
Sea transportation / Air transportation / Rail transportation / International express
MF-MI-BF medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is between 45-150 meters, and most time work with low intensity lights installed on the lower place