Customization: | Available |
---|---|
Light Source: | LED |
Material: | Aluminum |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Channel | Function |
1 | Dimmer |
2 | Strobe |
3 | Laser |
4 | Pan |
5 | Pan fine |
6 | Tilt |
7 | Tilt fine |
8 | Pan/Tilt Speed |
9 | Color |
10 | Static gobo wheel |
11 | Rotate gobo wheel |
12 | Rotated gobo rotate |
13 | Focus |
14 | Prism rotate |
15 | Marco function |
16 | Reset |
Voltage | AC100-240v 50/60Hz |
LED | 1pc150W white LED + Laser ( red100mw green 30mw ) |
Power consumption | 170W |
Color wheel | 7 colors+open |
Gobo wheel | 1 fixed gobo wheel: 8gobos plus blank 1 rotated gobo wheel: 6gobos plus blank,gobo rotating 360° |
Prism | 5 facets prism with rotated function |
Focus | linear focus from close to far |
Max temperature | 104°F(40°C) |
Data input/output | 3pin XLR-connection,anode socket |
Outside size | 290*182*400mm |
N.W | 7.5kg |
Description of operation panel
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
1 Fuse replacement With a flat head screwdriver wedge the fuse hold out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power.
2 Fixture linking You will need a serial data link to run light show of one or more fixtures using a DMX-512 controller or to run synchronized on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.
3 3-Pin to 5-Pin conversion chart Note! If you use a controller with a 5 pin DMX output connector. You will need to use a 5pin to 3 pin as apter CHAUVET Model No: DMX5M. Or DMX 5F The chart below details a proper cable conversion:
4 Setting up a DMX serial data link At first link the first light and DMX control through XLR-connection signal cable, then connect the light in series, as the follow:
1. Connect the (male) 3 pin connector side of the DMX cable to the output (female)3pin connector of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a(male) 3 pin connector. Then, proceed to connect from the output as stated above to the input of the following fixture and so on
LED stage lights have a wide range of applications in the entertainment industry. Here are some key areas where LED stage lights are commonly used:
Concerts and Live Music Performances: LED stage lights create dynamic lighting effects that enhance the atmosphere and visual impact of live music events.
Theater Productions: LED stage lights are utilized to set the mood, highlight actors or scenes, and create captivating lighting designs that complement the storytelling.
Dance Performances: LED stage lights are employed to accentuate dance movements, create vibrant color palettes, and add visual excitement to dance performances.
Corporate Events and Conferences: LED stage lights are used to provide professional lighting setups for keynote speeches, presentations, and product launches, enhancing the overall visual experience.
Fashion Shows: LED stage lights are utilized to create dramatic and evocative lighting designs that enhance the runway and showcase the clothing creations.
Television and Film Productions: LED stage lights are incorporated into studio setups to provide versatile and controllable lighting solutions for TV shows, movies, and commercials.
Theme Parks and Attractions: LED stage lights are used to illuminate rides, shows, and themed areas in theme parks, providing immersive lighting experiences for visitors.
Nightclubs and DJ Performances: LED stage lights are employed to create vibrant, energetic lighting displays that synchronize with the music and enhance the clubbing experience.
Exhibitions and Trade Shows: LED stage lights are utilized to highlight products, create visually appealing displays, and draw attention to exhibition booths.
Architectural Lighting Installations: LED stage lights are used to illuminate iconic buildings, monuments, and landmarks, enhancing their visual appeal and creating stunning nighttime displays.
These applications demonstrate the versatility and impact of LED stage lights in various entertainment, commercial, and architectural settings, ensuring captivating visual ex
LED Moving Head Stage Lights are an innovative and versatile lighting solution for stage performances and events. With their compact and dynamic design, these lights provide an array of features that elevate the visual impact of any production. Featuring powerful LED technology, they offer vibrant colors, smooth movements, and precise beam control. The moving head function allows for flexible positioning and sweeping effects, adding excitement and energy to performances. These lights are easy to operate, with programmable settings and customizable effects. With their durability, energy efficiency, and endless creative possibilities, LED Moving Head Stage Lights are essential tools for creating captivating lighting displays on stage.
FAQ:
Are you a manufacturer?
Absolutely, we are a professional manufacturer with 16 years of experience.
Our products include IP67 waterproof recessed lights, aluminum garden outdoor landscape lighting, inground buried lamp, and LED underground lights.
What is your main product?
Our main products are as follows:
LED Triproof lights/ LED Vapor Tight Lights
LED High Bay Lights
LED Flood lgihts
LED Explosion Proof Lights
LED Down Lights
LED underwater lights (swimming pool lights, fountain lights, underwater spotlights)
LED garden spot/spike lights
LED inground lights
What is the minimum order quantity (MOQ)?
For customized models, samples should be prepaid. We offer free customized models if the order quantity is more than 1000 pieces.
What are the payment options?
We accept T/T, Western Union, Paypal. Payment terms are 50% advanced payment and 50% balance payment. Our shipping terms are EXW, FOB, and CIF, CNF and DDP
What is the delivery time?
The delivery time is about 5-7 working days for samples and 20-30 working days for mass production, depending on the quantity.
How are the products packaged?
Each piece is packed in an individual color box and then placed in a strong master carton.
Why should you choose us?
1). We offer OEM/ODM services.
2). We have our own design team.
3). We offer high-quality products at reasonable prices.
4). We have no MOQ request.
5). Our sales team has 12 years of experience in underwater lighting.