250W DMX512 Rotation Sharp DJ Moving Head Lamp Party Light Concert Laser Light LED Moving Head Sharpy Beam Stage Light Moving Head Stage Light

• Light Source: LED
• Material: Aluminum Alloy
• Emitting Color: 9 Color Plates + White Light
• Control Channel: 24CH
• Control Mode: DMX512/ Master-Slave/Automatic
• Certification: CE, RoHS
• Model NO.: MF-DM250WBSW
• Voltage: AC 200V~240V/50~60Hz
• Light: 1PCS 150W White LED + Laser( Red 100MW , Green 30m
• Color Wheel: 10 Gobos with 3 Glasses Gobos+ White
• Max Temperature: 104°f(40°c)
• Data Input/Output: 3pin XLR-Connection/Anode Socket
• Power Consumption: 200W
• Beam Angle: 13.5°
• IP: IP20
• Pan Movement: 540°
• Tilt Movement: 540° Translation, 270° Tilt
• Transport Package: Carton
• Specification: 290x182x400mm
• Trademark: MF
• Origin: China
• HS Code: 9405499000
• Production Capacity: 10000PCS Per Months

Product Description

250W DMX512 Rotation Sharp DJ Moving Head Lamp Party Light Concert Laser Light LED Moving Head Sharpy Beam Stage Light Moving Head Stage Light

Quick Detail

 

Light source power: 250W

Voltage: AC 200V~240V/50~60Hz;

Color disk: Each color disk consists of 9 color plates + white light;

Pattern plate: 9 gobos+white effects;

Glass pattern: 7 gobos+white effects;

540° translation, 270° tilt.

Overheat protection;

Control mode: DMX512/ master-slave/Automatic;

IP20 protection level

Signal cable connection

Light fixtures feature standard DMX input and output 3-core or 5-core XLR sockets.Use a
shielded twisted-pair signal cable designed for DMX 512;The signal line is generally
connected at 150 meters, and the DMX512 signal amplifier must be added for long distance signal transmission.

Connect a shielded twisted-pair signal line from the DMX outlet of the controller to the DMX input of the first device, and from the DMX outlet of the first device to the DMX input of the second device, and so on, until all lights have been connected. Then install a terminal plug on the last connected light outlet 3-core jack on each circuit.(Weld a 4/1W, 120Ω resistor between the 2 and 3 pins of the 3-core pin cannon plug).

 

Detailed Photos

 

  
 

Setting

 

Options	Instructions
Running mode	DMX	Slave state: Receives DMX signals from the console or mainframe
	Bootstrapping	Host state: Self-actuated and sends DMX signal to slave
	Voice control
DMX address	1-512	Press "OK" to enter editing mode.At this point, the hundreds digit is selected, and press the "up" and "down" keys to change the address code.Press the "OK" key again to select the tens edit.Press "OK" once more to select the ones edit.Press again to exit the editing state
Motor reset	Off
	On	Light fixture reset
Channel mode	24CH	24 channel mode
Language	Chinese	Set to the Chinese interface
	English	Set to the English interface
Screen flip	Off	Front display
	On	Screen reverse display
X Inversion	Off
	On
Y-reverse	Off
	On
XY swap	Off
	On	Channel for switching XY axes (including trims)
XY encoder	On	Use an encoder (optocoupler) to judge out of step and automatically correct the position
	Off	Correct the position without using an encoder (optocoupler)
DMX signal	Hold	Continue running in its original state
	Clear zero	Turn the motor back and stop running
The color wheel changes linearly	On	The color wheel changes linearly
	Off	Color wheel nonlinear change, half color change
Restore default Settings		When you see the confirmation dialog after pressing "OK", press "OK" again to restore the default Settings

 

Channel	Function
1	Color
2	Strobe
3	Dimming
4	Gobo
5	Prism 1
6	Prism 2
7	Prism 1 Rotate
8	Prism 2 Rotate
9	Frost & Colorful
10	Focus
11	X
12	X Fine
13	Y
14	Y Fine
15	XY Speed
16	Reset
17	LED_Dimming
18	LED_Strobe
19	LED_Red
20	LED_Green
21	LED_Blue
22	LED_Color macro
23	LED_Scene
24	LED_Scene Speed

 

Product Description

If you use a controller with a 5 pin DMX output connector. You will need to use a 5pin to 3 pin as apter

 Model No: DMX5M. Or DMX 5F
The chart below details a proper cable conversion:




At first link the first light and DMX control through XLR-connection signal cable, then connect the light in series, as the follow:

Control panel

Installation Instructions

Light fixtures can be placed horizontally, slanted, and hung upside down.Be sure to pay attention to the installation method when hanging diagonally and upside down.
As shown in Figure 2, before positioning the lamp, it is necessary to ensure the stability of the installation site. When installing the reverse hanging, it is necessary to ensure that the lamp does not fall down on the support frame. It is necessary to use the safety rope through the support frame and the lamp handle for auxiliary hanging to ensure safety. Prevent the luminaire from falling and sliding.
When installing and debugging the lamps, it is forbidden for pedestrians to pass under them. Regularly check whether the safety rope is worn and whether the hook screws are loose.
Our company does not assume any responsibility for all consequences caused by the fall of the lamp due to the unstable installation of the hanging.

Schematic diagram of the lamp hanging upside down

Packaging & Shipping

Packing list

 

Sea transportation / Air transportation / Rail transportation / International express

Applications

LED stage lights have a wide range of applications in the entertainment industry. Here are some key areas where LED stage lights are commonly used:
Concerts and Live Music Performances: LED stage lights create dynamic lighting effects that enhance the atmosphere and visual impact of live music events.
Theater Productions: LED stage lights are utilized to set the mood, highlight actors or scenes, and create captivating lighting designs that complement the storytelling.
Dance Performances: LED stage lights are employed to accentuate dance movements, create vibrant color palettes, and add visual excitement to dance performances.
Corporate Events and Conferences: LED stage lights are used to provide professional lighting setups for keynote speeches, presentations, and product launches, enhancing the overall visual experience.
Fashion Shows: LED stage lights are utilized to create dramatic and evocative lighting designs that enhance the runway and showcase the clothing creations.
Television and Film Productions: LED stage lights are incorporated into studio setups to provide versatile and controllable lighting solutions for TV shows, movies, and commercials.
Theme Parks and Attractions: LED stage lights are used to illuminate rides, shows, and themed areas in theme parks, providing immersive lighting experiences for visitors.
Nightclubs and DJ Performances: LED stage lights are employed to create vibrant, energetic lighting displays that synchronize with the music and enhance the clubbing experience.
Exhibitions and Trade Shows: LED stage lights are utilized to highlight products, create visually appealing displays, and draw attention to exhibition booths.
Architectural Lighting Installations: LED stage lights are used to illuminate iconic buildings, monuments, and landmarks, enhancing their visual appeal and creating stunning nighttime displays.
These applications demonstrate the versatility and impact of LED stage lights in various entertainment, commercial, and architectural settings, ensuring captivating visual ex