| Customization: | Available |
|---|---|
| Color Temperature: | Pure White |
| Lamp Body Material: | Alu.+Stainless Steel+Metal |
|
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Power: 60/120/180/240/300W
Efficacy: 120-160lm/W
Control: Photocell/Motion Sensor/1-10V dimming
Application: Architecture/Factory Warehouse/Billboard/
Auto dealership/Area lighting
Housing
| Power | Opticial system | Lumens |
| 60W | Type I, Type II, Type III, Type IV, Type V | 160lm/w |
Floodlights are not spotlights, projection lights, or spotlights. Floodlights produce highly diffuse, directionless light instead of a clearly defined beam of light, resulting in soft and transparent shadows. When used for object illumination, the speed of lighting reduction is much slower than when using spot lights. Some floodlights even have very slow lighting reduction, appearing as a light source that does not produce shadows. Spotlights project directional and well-defined beams of light, illuminating a specific area
The surface treatment of the lamp body is made of aluminum alloy die-casting and electrostatic spraying. The coating is resistant to high temperature, acid and alkali, and anti-aging. The lamp body adopts an integrated design of light source and electrical appliance, with a compact structure and small volume. The reflector is made of imported high-purity aluminum material, with multiple reflective surface designs, forming various light distribution requirements. The light efficiency is high, and the glare light source can meet customer needs, Single or double ended metal halide lamps or high-pressure sodium lamps can be used. The lamp head is made of E40 or RX7s with a face shield of 5mm tempered glass, which is safe, high-temperature resistant, high-strength, and has good light transmittance. The sealing strip is corrosion-resistant silicone rubber sealing strip, which has good sealing, waterproof, and dustproof properties. High performance inductance ballasts, triggers, and capacitors are used to ensure that the electrical performance of the lamp meets the requirements of national standards. The internal wiring is 1mm PVC, suitable for landmarks, sports venues, squares, trees, billboards, etc Parking lots, exterior walls of buildings, etc
Floodlights, as a replacement product for electric light sources, have been increasingly recognized and applied in many fields. Its main characteristics are as follows:
Floodlight
1. Long lifespan: General incandescent lamps, fluorescent lamps, energy-saving lamps, and other gas discharge lamps all have filaments or electrodes, and the sputtering effect of the filaments or electrodes is precisely the inevitable component that limits the lifespan of the lamp. High frequency electrodeless discharge lamps require little or no maintenance and have high reliability. Their service life can reach up to 60000 hours (calculated as 10 hours per day, the service life can reach more than 10 years). Compared to other lamps: 60 times higher than incandescent lamps; 12 times that of energy-saving lamps; 12 times that of fluorescent lamps; 20 times that of high-pressure mercury lamps; The ultra long lifespan of floodlights greatly reduces maintenance troubles and replacement times, saves material and labor costs, and ensures long-term normal use. Due to the lack of electrodes in floodlights, they emit light through a combination of electromagnetic induction and fluorescence discharge principles, so there are no necessary components that limit their lifespan. The service life only depends on the quality level of electronic components, circuit design, and manufacturing process of the foam, with a general service life of 60000 to 100000 hours.
2. Energy saving: Compared with incandescent lamps, energy saving reaches about 75%, and the luminous flux of 85W floodlights is roughly equivalent to that of 500W incandescent lamps.
3. Environmental protection: It uses solid mercury agent, even if broken, it will not cause pollution to the environment, with a recycling rate of over 99%, making it a truly environmentally friendly green light source.
4. No stroboscopic effect: Due to its high working frequency, it is considered as "completely devoid of stroboscopic effect" and will not cause eye fatigue, protecting eye health.
5. Good color rendering: The color rendering index is greater than 80, and the light color is soft, presenting the natural color of the illuminated object.
6. Optional color temperature: From 2700K to 6500K, customers can choose according to their needs, and can be made into colored light bulbs for garden decoration lighting.
7. High visible light ratio: In the emitted light, the visible light ratio reaches over 80%, resulting in good visual effects.
8. No preheating is required. It can be started and restarted immediately, and multiple switches will not cause the phenomenon of light decay in ordinary charged discharge lamps.
9. Excellent electrical performance: high power factor, low current harmonics, constant voltage power supply, output constant luminous flux.
10. Installation adaptability: It can be installed in any direction without restrictions.
LED floodlights are a point light source that can illuminate evenly in all directions, and their illumination range can be adjusted arbitrarily, represented as a regular octahedron in the scene. Omni lights are the most widely used light source in renderings, and standard omni lights are used to illuminate the entire scene. Multiple floodlights can be applied in the scene to produce better results. Omni lights are the most widely used light source in renderings, and multiple omni lights can be used to coordinate in a scene to create better effects. It is the uniform illumination of an object from a specific point in all directions.
characteristic
Floodlight is the uniform illumination of an object from a specific point in all directions.
install
Materials required: LED guardrail light clip, transformer with waterproof function, and sub controller. The steps are as follows:
1. Install guardrails and drill holes on the wall, with spacing generally within 3 centimeters according to actual requirements;
2. Take anti-static measures, such as grounding the workbench, wearing corresponding anti-static clothing for workers, and taking anti-static measures because different grades of LED floodlights have different quality and anti-static capabilities;
3. Pay attention to sealing during installation, as poor sealing may affect the lifespan of LED floodlights due to the diameter;
4. The wiring of LED floodlights should preferably not exceed 25 centimeters, and transformers with high power can be correspondingly lengthened, otherwise the brightness will be affected.
take care
1. Try to use the series LED form as much as possible, as the voltage difference of LED floodlights is special. The peak current of ordinary LED is maintained at 80 mA, and the reverse voltage is around 6V. When designing the circuit for LED applications, it is important to pay attention to the peak voltage and current being within this limit.
2. When welding, use a voltage of less than 25 watts, and control the temperature of the soldering iron to below 300 degrees Celsius. When exposed to high temperatures, do not squeeze the epoxy resin part of the SMD LED, or wipe it with a pointed hard object, as LED lamps are very fragile and easily damaged, and the welding time is less than 3 seconds.
LED floodlights are widely used, so installation techniques and precautions are very important. LED is a new light source, and under the correct installation method, it can ensure the stable and long-term normal operation of LED floodlights.
){kind=link}