Factory Price IP66 Waterproof Low-Intensity L810 Single 45-105m AC110-240V Red Color LED Aviation Obstruction Light

• Customization: Available
• Type: Low Intensity Aviation Obstruction Light
• Emitting Color: Red
• Model NO.: MF-LI-B2-S
• Certification: CE, ISO
• Light Source: LED
• Intensity(CD): ≥32.5CD(Type B)
• Flash Characteristics: Steady-Burning/20/30/60
• Operating Voltage: DC(48VDC)&AC(100-240VAC)
• Power: 2.5
• Body Material: Polycarbonate
• Base Material: Die-Casting Aluminum
• Transport Package: 1PC/CTN
• Specification: 110*150*110mm 0.7kg
• Trademark: MF
• Origin: China
• HS Code: 9405429000
• Production Capacity: 50000PCS/Year

Product Description

Factory Price IP66 Waterproof Low-intensity L810 Single 45-105m AC110-240V Red Color LED Aviation Obstruction Light

Product Description

The Low-intensity L810 Single Aviation Obstruction Light is a steady burning aviation light designed for marking the tops of obstacles not exceeding 45 meters in height. This light is compliant with ICAO Annex 14 Volume 1, Seventh edition, and meets FAA L-810 standards, providing a reliable aviation safety marking for various structures and facilities.

• Light Source: LED
• Available Colors: Red (32.5cd or alternative intensities)
• Horizontal Output Angle: 360 degrees
• Vertical Divergence Angle: ≥10 degrees
• Flash Characteristics: Steady burning / 20/30/60 adjustable
• Operating Voltage: DC(12V, 48V) or AC(110-240VAC) or other
• Power Consumption: 2.5W
• Protection Rating: IP66
• Materials: Polycarbonate, Die-casting aluminum
• Mounting: Standard 3/4 inch pipe thread

Key Features:

• Electrical Features: Utilizes 3 high-power CREE LEDs, with short circuit and open circuit protection
• Physical Features: Unique PMMA lens design, bird spike deterrent, UV-resistant polycarbonate cover, long-life waterproof base
• System Design: Built-in photocell for automatic day-night operation, adjustable flashing modes, overvoltage and surge protection
• Optional Features: GPS synchronized flashing, infrared LEDs for pilot night vision goggles, alarm contact points, and more

Electrical
· 3 high power CREE LED, make sure LED keep bright while use
· Power supply in DC(48V)& AC(110-240VAC), the light could work normally when input 48VDC/110VAC/240VAC
· LED power supply board includes short circuit and open circuit protection, Line surge protection by metal oxide varistor

Physical

· Bird deterrent spike on top

· Unique designed PMMA lens for converging light and good transparency

· High translucency and anti-UV polycarbonate cover could use 3-5years without yellowing

· UV protection Powder coated bright yellow color base make better visibility and also long life in harsh environments()

· Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection

· 3/4inch thread hole make pole installation easy

· No screw fix type - just twist, the cover will be fixed tightly
 

System design

· Built-in photocell for day/night operation(dusk to dawn operation, automatically turn on when background luminance is below 50cd/m2

· Steady/20FPM/30FPM/60FPM DIP switches on PCB

· Surge and lightning protection
 

Optional

· Alarm contact(NO COM NC)for remote monitoring

· Infrared LED for pilot using NVG

· GPS sync flashing

Compliance

· ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A / B /E Obstruction Light

· FAA L-810

Application

This low-intensity light is suitable for various locations including high-rise buildings, chimneys, telecommunication towers, poles, tower cranes, wind turbines, and other structures not exceeding 45 meters in height. For obstacles taller than 45 meters, it can be used in conjunction with medium or high-intensity obstruction lights to indicate hazardous obstacles with a steady red safety light.

low-intensity light could be used alone on the top of the Highrise Building, High Chimney, marking towers (Telecom, GSMMicro wave & TV), High Pole, Tower Crane, Wind Turbine, etc whenthe height is lower than 45m.

When obstacle object is higher than 45m, MF-LI-B2 can be used with Medium-intensity or high-intensity obstruction light to indicate hazardous obstructions with a steady red safety light.

1. High-rise Buildings:

   • Marking rooftops of skyscrapers to ensure visibility for low-flying aircraft.
   • Enhancing safety and compliance with aviation regulations in urban environments.

2. Telecommunication Towers:

   • Providing a clear warning signal for aerial navigation around tall communication structures.
   • Ensuring the safety of both aircraft and tower maintenance personnel.

3. Wind Turbines:

   • Illuminating wind turbine towers to prevent collisions with aircraft and improve overall airspace safety.
   • Meeting aviation guidelines for marking obstacles in wind farm areas.

4. Industrial Chimneys:

   • Alerting pilots to the presence of tall industrial chimneys during takeoff and landing.
   • Enhancing the visibility of industrial facilities for aerial surveys and inspections.

5. Power Transmission Towers:

   • Increasing the visibility of power transmission structures for aircraft flying at lower altitudes.
   • Preventing potential hazards and ensuring safe aerial navigation near power lines.

6. Bridge Structures:

   • Highlighting bridge pillars and support structures to avoid accidental collisions by aircraft.
   • Improving the safety of aerial traffic near bridges and overpasses.

7. Water Towers:

   • Signaling the presence of water towers to pilots flying at low altitudes or during approach and departure.
   • Promoting airspace safety around water supply infrastructure in urban and rural areas.

8. Antenna Masts:

   • Indicating the location of antenna masts and tall radio towers for aircraft navigation.
   • Facilitating safe flight paths near broadcasting and communication installations.

9. Observation Towers:

   • Ensuring visibility of observation towers to prevent aerial accidents and ensure pilot awareness.
   • Enhancing safety around tourist attractions and scenic viewpoints with tall structures.

10. Construction Cranes:

    • Warning aircraft of the presence of construction cranes at building sites.
    • Promoting safe aerial operations near active construction zones and tall cranes.

Dimension & Installation:

Specifications
Light Source	LED
Available Colors	Red
Intensity(cd)	≥32.5cd(type B), OTHER OPTIONAL (10cd, 100cd, etc.)
Horizontal Output(degree)	360
Vertical Divergence(degree)	≥10
Flash  Characteristics	Steady-burning/20/30/60 adjustable
Working Mode	Main & stand by (other modes are optional)
Operation Mode	Dusk-to-dawn Automatically as standard.
LED Life Experience	>100,000
Electrical Characteristics
Operating Voltage	DC(12V, 48VDC)&AC(110-240VAC) or others
Power(W)	2.5
Lighting surge	IEC61000-4-5 L-N ±3kV IEC61000-4-5 L-PE ±6kV IEC61000-4-5 N-PE ±6kV
Electrostatic	IEC61000-4-2 CONTACT DISCHARGE 8kV
Circuit Protection	Integrated
Physical Characteristics
Body Material	Polycarbonate
Base Material	Die-casting aluminum
Mounting	3/4 inch pipe thread or D140mm*M10*3
Dimension(mm)	Φ90*130
Weight(kg)	0.3
Product Life Expectancy	10 years plus
Environmental Factors
Ambient Temperature	-40~65
Storage Temperature	-55~70
Humidity	10%-95%RH (No condensation)
Wind Speed	240km/h
Waterproof	IP66
Compliance
ICAO	Annex 14 Volume 1,'Aerodrome Design and Operations' Seventh edition July 2016, table 6.3 Low-intensity Type A/B/E Obstacle Light
FAA	L-810
Options Available	NVG(Night Vision Goggles) compatible LED Working mode GPS sync flashing Dry contac output Solar Power system

Configuration

Model	Power input	Flash rate	Lens color	Photocell	Dry contact alarm	GPS sync flashing	Control
MF-LI-B2	110-240Vac&48Vdc 12Vdc 24Vdc 36Vdc	Steady 20FPM 60FPM 40FPM 30FPM	Red  Clear	Built-in No	Np Alarm Alarm	No sync GPS SNNC	Used alone Used with controller

Remark: The first line is the factory seeting if no special request.
 

Conclusion:

The Low-intensity L810 Single Aviation Obstruction Light is a high-quality and reliable aviation safety marking light suitable for a wide range of applications. Its advanced design and features make it an ideal choice for ensuring aviation safety. For more information or inquiries, feel free to contact us.

Company Profile

Ming Feng Lighting Co., Ltd. is a leading LED lighting manufacturer with its own factory. Our company specializes in the design, production, and distribution of high-quality LED lighting products. With years of experience in the industry, we have established a reputation for excellence and innovation in LED lighting technology. Our team of skilled professionals is dedicated to providing customers with the best LED lighting products and services. At Ming Feng Lighting Co., Ltd., we pride ourselves on our commitment to quality and customer satisfaction. Whether you are looking for residential or commercial LED lighting solutions, we have the expertise and resources to meet your needs.

 

FAQ

Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.

Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.

Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.

Q5: How long time to ship the goods if place an order?
A5:  Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.