| Customization: | Available |
|---|---|
| Type: | Low Intensity Aviation Obstruction Light |
| Emitting Color: | Green, White, Yellow, Blue, Red |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles.
It could be used as Aiming point light, perimeter light of FATO (Final approach and take-off areas), TLOF (Touchdown and lift-off areas), taxiway, Flight path alignment guidance lighting, etc. The emitting color is green or yellow or white or blue.
8inch International standard mounting for aerodrome inset light
· Power supply available in AC(110-240VAC), DC48V
Physical
· Pressure resistance lens allowed the vehicles go through on light
· Die-casting aluminum covered by color powder coasted which have good corrosion protection and load bearing.· IP68 waterproof ensure light work fine underground
Optional
· Infrared LED for pilot using NVG(Night Vision Goggles)
· Controller for power supplying and turn ON/OFF light
· ICAO Annex 14 Volum II Heliports 5.3.
· FAA AC 150/5390-2B Heliport Design Guide· CAAC MH 5013-2014 Technical Standards of Civil Heliports
The Helipad Light is suitable for the following scenarios:
· Helipad/Heliport TLOF Areas: Suitable for lighting in touchdown and lift-off areas.
· Heliport FATO Areas: Designed for lighting requirements in final approach and take-off areas.
· Helipad Runway: Indicates the direction and location of the helipad's runway.
· Helipad Taxiway: Provides lighting and guidance for the taxiway.
· Aiming Point Light: Illuminates as a target point for aircraft approaching or departing.
· Helipad/Heliport Lighting on the Roof of Building: Provides lighting on the rooftop of buildings for helipad operations.
· Helipad Taxiway Light (TA(L)) Areas: Offers blue lighting for the taxiway, enhancing navigation and safety.
| Specifications | |
| Light Source | CREE ultra high intensity LED |
| Available Colors | White, Red, Green, Yellow, Blue |
| Intensity(cd) | ICAO standard, refer to photometric table |
| Horizontal Output(degree) | Omni direction 360° |
| Vertical Divergence(degree) | ICAO Specification |
| Flash Characteristics | steady burning |
| Operation Mode | 24 hours operation |
| LED Life Experience | >100,000 |
| Electrical Characteristics | |
| Operating Voltage | 110-240VAC, 48VDC, 24VDC or others |
| Power(W) | <8.5W |
| Physical Characteristics | |
| Body Material | Die-casting aluminum |
| Overall Size (mm) | Φ220*100 |
| Installation Size(mm) | Φ220*100-M10*2 |
| Weight(kg) | 4 |
| Product Life Expectancy | 10 years plus |
| Environmental Factors | |
| Humidity | 0%-100% |
| Ambient temperature | -55~70 |
| Waterproof | IP68 |
| Compliance | |
| ICAO | ICAO Annex 14 volume II heliports 5.3 |
| Options Available | Infrared LED compatible for NVG (Night Vision Goggles) Light intensity adjustable VHF pilot to ground remote control Solar power system |
| Model | Application | Emitting color | Beam angle |
| MF-HP-I-TLOF(L) | Touchdown and lift-off area lighting | Green | omnidirectional |
| MF-HP-I-F(L) | Flight path alignment guidance lighting | White | omnidirectional |
| MF-HP-I-FATO(L) | Final approach and take-off area lighting | White | omnidirectional |
| MF-HP-I-A(L) | Aiming Point Light | White | omnidirectional |
| MF-HP-I-IR | Heliport Lighting | Infrared | omnidirectional |
| MF-HP-I-TA(L) | Taxiway Light | Blue | omnidirectional |
| Application | Vertical Degree(°) | MF-HP-I Average Light Intensity (cd) | ICAO Standard |
| Touchdown and lift-off area lighting | 20°<E 90° | 27.1 | 3 |
| 13°<E 20° | 54.6 | 8 | |
| 10°<E 13° | 50.5 | 15 | |
| 5°<E 10° | 44.6 | 30 | |
| 2°<E 5° | 38.4 | 15 | |
| Flight path alignment guidance lighting | 20°<E 90° | 66.6 | 3 |
| 13°<E 20° | 158.7 | 8 | |
| 10°<E 13° | 149.3 | 15 | |
| 5°<E 10° | 137.9 | 30 | |
| 2°<E 5° | 109.9 | 15 | |
| Final approach and take-off area lights and aiming point lights | 0° | 83.1 | 10 |
| 3° | 106.7 | 100 | |
| 10° | 145.2 | 100 | |
| 20° | 163.9 | 100 | |
| 25° | 182.2 | 50 | |
| 30° | 180.5 | 10 |
Ming Feng Lighting Co., Ltd. is a leading LED lighting manufacturer with its own factory. Our company specializes in the design, production, and distribution of high-quality LED lighting products. With years of experience in the industry, we have established a reputation for excellence and innovation in LED lighting technology. Our team of skilled professionals is dedicated to providing customers with the best LED lighting products and services. At Ming Feng Lighting Co., Ltd., we pride ourselves on our commitment to quality and customer satisfaction. Whether you are looking for residential or commercial LED lighting solutions, we have the expertise and resources to meet your needs.
Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.
Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.
Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.
Q5: How long time to ship the goods if place an order?
A5: Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.
){kind=link}