| Customization: | Available |
|---|---|
| Light Source: | LED |
| Material: | Aluminum |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DMX CHANNEL SHEET
|
CHANNEL
|
FUNCTION | VALUE |
DESCRIPTION
|
| 1 |
Pan move
|
0~255
|
Pan move adjustment
|
| 2 |
Pan fine-tuning
|
0~255
|
Pan fine-tuning adjustment
|
| 3 |
Tilt move
|
0~255
|
Tilt move adjustment
|
| 4 |
Tilt fine-tuning
|
0~255
|
Tilt fine-tuning adjustment
|
| 5 |
XY speed
|
0~255
|
XY speed adjustment
|
| 6 |
Dimmer
|
0~255
|
Dimmer ,0-255 from dark to brightness
|
| 7 |
Strobe
|
0~3
|
OFF,not strobe
|
|
4~251
|
ON,strobe from slow to fast | ||
|
252~255
|
ON,not strobe
|
||
| 8 |
Color wheel
|
0~49
|
Color wheel switching,5 value for half
step,10 value for whole step
|
|
50~200
|
Forward rotate,from fast to slow
|
||
|
201~255
|
Reverse rotate,from slow to fast
|
||
| 9 |
Zoom motor
|
201~255
|
Zoom adjustment
|
| 10 |
Reset
|
0~49
|
null,reserve
|
|
50~99
|
The smallest motor rest,it reset after the channel value keep 5s later
|
||
|
100~199
|
XY motor rest,it reset after the channel
value keep 5s later
|
||
|
200~255
|
All motors rest,it reset after the channel
value keep 5s later
|
|
Options
|
Description
|
|
|
Operation Mode
|
DMX |
Slave:receive DMX signal from controller or master fixture
|
|
Auto running1
|
Auto running effect demonstrate
Master:auto running then sending DMX
Auto running2 signal to slave fixture
|
|
|
Auto running2
|
||
|
Random
|
||
|
Sound control
|
||
|
DMX Address
|
1-512
|
press "ok" into editing,then press "up"
"down" to change channel value,then
press "ok" to save and exit editing
|
|
Channel Mode
|
Standard 10CH
|
Standard 10 channel mode
|
|
X Invert
|
OFF
|
ON means exchange the position of the
beginning and the end,the default is OFF
|
|
ON
|
||
|
Y Invert
|
OFF
|
ON means exchange the position of the
beginning and the end,the default is OFF
|
|
ON
|
||
|
XY Swap
|
OFF | |
| ON |
Swap the channels of X and Y(
include
fine-tuning)
|
|
|
XY Encoders
|
ON |
Use the encoder to judge miss step and
correct the position automatically
|
| OFF |
Do not use the encoder to Correct the
position
|
|
|
DMX Signal
|
KEEP
|
Continue operating as it was
|
|
CLEAR
|
Motors reset,stop operating
|
|
|
Color Wheel Linear Change
|
ON
|
Color wheel linear change
|
CONTROL PANEL
PACKING LIST
|
Product Name
|
Quantity |
|
Moving Head Light
|
1 PCS |
|
Power-line
|
1 BASE |
| User Manual | 1 PCS |
UNPACKING INSTRUCTIONS
On receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are presented, and have been received in a good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows, sign of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture should be returned in original factory box and packing.
SAFETY INSTRUCTIONS
Please read these instructions, it includes important information about the installation, usage and maintenance of this product.
Please keep this user guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.
Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.
Before the first time to use it, Please check whether the damage in transit, if happen damages in transit, please do not use this lamp, and please asap contact distributors or manufacturers.
Please don't install the lamp in the ordinary combustible material on the surface.
Lamp should be installed in the well ventilated place, and the distance of the wall to keep it over 10 cm, at the same time, please check the fan hole was clear.
Do not use lamp direct project in flammable objects, lamp and the radiation of the distance between the objects please keep it over 12 m.
Do not use direct lamp project light source , to avoid damage the eyes. Before installation, please make sure your use power supply voltage and marked voltage
Note: before any install, maintain and clean lamp, please confirm cut off the power supply
Ming Feng Lighting Co., Ltd. is a leading LED lighting manufacturer with its own factory. Our company specializes in the design, production, and distribution of high-quality LED lighting products. With years of experience in the industry, we have established a reputation for excellence and innovation in LED lighting technology. Our team of skilled professionals is dedicated to providing customers with the best LED lighting products and services. At Ming Feng Lighting Co., Ltd., we pride ourselves on our commitment to quality and customer satisfaction. Whether you are looking for residential or commercial LED lighting solutions, we have the expertise and resources to meet your needs.
Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.
Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.
Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.
Q5: How long time to ship the goods if place an order?
A5: Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.
){kind=link}