DMX512 LED Bsw 3 In1 Retro Flash Lighting LED Module Beam Moving Head PAR Stage Light for Event Party Nightclub Concert

• Customization: Available
• Material: Aluminum
• IP Rating: IP20
• Model NO.: MF-DM250WBSW
• Certification: CE, RoHS
• Focus: Linear Focus From Close to Far
• Power Consumption: 200W
• Beam Angle: 13.5 Degree
• Electronic Dimmer: 0~100%
• Pan Movement: 540°
• DMX Channel: 24CH
• Max Temperature: 104°f(40°c)
• Power of Light Source: 150W
• Color Wheel: 10 Gobos with 3 Glasses Gobos+ White
• Tilt Movement: 540° Translation, 270° Tilt
• Transport Package: Carton Box
• Specification: 290*182*400mm
• Trademark: MF
• Origin: China
• HS Code: 9405499000
• Production Capacity: 10000PCS Per Months

Product Description

DMX512 RGB Single Retro Flash Lighting LED Module Beam Moving Head PAR Stage Light for Event Party Nightclub Concert 

Quick Detail

Light source power: 250W

Voltage: AC 200V~240V/50~60Hz;

Color disk: Each color disk consists of 9 color plates + white light;

Pattern plate: 9 gobos+white effects;

Glass pattern: 7 gobos+white effects;

540° translation, 270° tilt.

Overheat protection;

Control mode: DMX512/ master-slave/Automatic;

IP20 protection level

 

Signal cable connection

Light fixtures feature standard DMX input and output 3-core or 5-core XLR sockets.Use a shielded twisted-pair signal cable designed for DMX 512;The signal line is generally connected at 150 meters, and the DMX512 signal amplifier must be added for long distance signal transmission.

Connect a shielded twisted-pair signal line from the DMX outlet of the controller to the DMX input of the first device, and from the DMX outlet of the first device to the DMX input of the second device, and so on, until all lights have been connected. Then install a terminal plug on the last connected light outlet 3-core jack on each circuit.(Weld a 4/1W, 120Ω resistor between the 2 and 3 pins of the 3-core pin cannon plug).

 

Detailed Photos

 

Product Description

If you use a controller with a 5 pin DMX output connector. You will need to use a 5pin to 3 pin as apter

 Model No: DMX5M. Or DMX 5F
The chart below details a proper cable conversion:




At first link the first light and DMX control through XLR-connection signal cable, then connect the light in series, as the follow:

Control panel

Installation Instructions

Light fixtures can be placed horizontally, slanted, and hung upside down.Be sure to pay attention to the installation method when hanging diagonally and upside down.
As shown in Figure 2, before positioning the lamp, it is necessary to ensure the stability of the installation site. When installing the reverse hanging, it is necessary to ensure that the lamp does not fall down on the support frame. It is necessary to use the safety rope through the support frame and the lamp handle for auxiliary hanging to ensure safety. Prevent the luminaire from falling and sliding.
When installing and debugging the lamps, it is forbidden for pedestrians to pass under them. Regularly check whether the safety rope is worn and whether the hook screws are loose.
Our company does not assume any responsibility for all consequences caused by the fall of the lamp due to the unstable installation of the hanging.

Schematic diagram of the lamp hanging upside down

Setting

 

Options	Instructions
Running mode	DMX	Slave state: Receives DMX signals from the console or mainframe
	Bootstrapping	Host state: Self-actuated and sends DMX signal to slave
	Voice control
DMX address	1-512	Press "OK" to enter editing mode.At this point, the hundreds digit is selected, and press the "up" and "down" keys to change the address code.Press the "OK" key again to select the tens edit.Press "OK" once more to select the ones edit.Press again to exit the editing state
Motor reset	Off
	On	Light fixture reset
Channel mode	24CH	24 channel mode
Language	Chinese	Set to the Chinese interface
	English	Set to the English interface
Screen flip	Off	Front display
	On	Screen reverse display
X Inversion	Off
	On
Y-reverse	Off
	On
XY swap	Off
	On	Channel for switching XY axes (including trims)
XY encoder	On	Use an encoder (optocoupler) to judge out of step and automatically correct the position
	Off	Correct the position without using an encoder (optocoupler)
DMX signal	Hold	Continue running in its original state
	Clear zero	Turn the motor back and stop running
The color wheel changes linearly	On	The color wheel changes linearly
	Off	Color wheel nonlinear change, half color change
Restore default Settings		When you see the confirmation dialog after pressing "OK", press "OK" again to restore the default Settings

 

Channel	Function
1	Color
2	Strobe
3	Dimming
4	Gobo
5	Prism 1
6	Prism 2
7	Prism 1 Rotate
8	Prism 2 Rotate
9	Frost & Colorful
10	Focus
11	X
12	X Fine
13	Y
14	Y Fine
15	XY Speed
16	Reset
17	LED_Dimming
18	LED_Strobe
19	LED_Red
20	LED_Green
21	LED_Blue
22	LED_Color macro
23	LED_Scene
24	LED_Scene Speed

 

Application

The Ming Feng Lighting Co.,Ltd LED Outdoor Par Light is a versatile lighting fixture with a wide range of applications in both indoor and outdoor settings. Some common applications of this product include:

Architectural Lighting: The fixture can be used to highlight architectural details, illuminate building facades, and enhance the aesthetics of structures.

Stage Lighting: Ideal for stage performances, concerts, theater productions, and other live events where dynamic and colorful lighting effects are required.

Nightclub Lighting: Well-suited for creating vibrant and energetic lighting atmospheres in nightclubs, bars, and entertainment venues.

Event Lighting: Suitable for a variety of events such as weddings, parties, corporate functions, and exhibitions where versatile and eye-catching lighting is essential.

Outdoor Performances: With its IP65 waterproof rating and durable design, the fixture is perfect for outdoor performances, festivals, and events.

Signage and Advertising: Can be used for illuminating signage, displays, and promotional materials to attract attention and enhance visibility.

Mood Lighting: Provides ambient lighting for restaurants, hotels, retail spaces, and other commercial establishments to create a welcoming and engaging atmosphere.

Art Installations: Suitable for lighting up art installations, sculptures, and creative displays to add a dramatic and artistic flair.

Broadcasting and Filming: The fixture can be used in studios, film sets, and broadcasting environments to create customized lighting setups for filming and production.

Theme Parks and Attractions: Ideal for theme parks, museums, and attractions to enhance the visitor experience with captivating lighting effects.

Packaging & Shipping

 Packing list
 

Product name	quantity
moving head light	1 pcs
Power -line	1 base
User manual	1pcs

 

 

Company Profile