Faa Icao LED Airport Landing Indicator Solar Apron Aid to Navigation CPAP Visual Approach Slope Indicator Papi Light

• Customization: Available
• Type: LED Visual Approach Slope Indicator
• Emitting Color: Yellow/Green/Red
• Model NO.: MF -HP -VASI
• Certification: CE, ISO
• Light Source: CREE Ultra High Intensity LED
• Working Mode: Steady Burning
• Operation Mode: 24hours Operation
• LED Life Experience(Hours): >100,000
• Operating Voltage: Operating Voltage
• Flash Characteristics: 50
• Circuit Protection: Integrated
• Ambient Temperature(ºC): -35~80
• Humidity: 10~90%
• Wind Speed: 80m/S
• Waterproof: IP65
• Icao: Icao Annex 14 Volume II –figure 5-11
• Faa: Faa AC 150/5390-2b Heliport Design Guide
• Transport Package: 1PC/CTN
• Specification: 520x184x455mm
• Trademark: MF
• Origin: China
• HS Code: 9405429000
• Production Capacity: 50000PCS/Year

Product Description

FAA ICAO LED Airport Landing Indicator Solar Apron Aid to Navigation CPAP Visual Approach Slope Indicator PAPI Light

Product Description

The LED Visual Approach Slope Indicator (VASI) is used to guide aircraft to approach the runway at an appropriate altitude.It is specially designed to accommodate the helicopter's steep angles of descent and deliberate speeds.

There are three Colors which to show three wide horizontal beamsin different colored light. And it is projected in fan shaped array into the incoming flight pattern.
The top beam is yellow which indicates a too high altitude of approach; The center beam is green which is the correct altitude;
The lower beam is red which indicates a too low altitude.

By staying within the green light beam that is correct altitude.

This product is suitable for large civil airports to provide navigational aids to guide and warn helicopters for safe take-off and landing.

The solar powered PAPI light is set on the left side of the runway (for pilots on approach) but may be located on the right side of the runway where this is not practicable.
Another set of lights may be located on the other side of the runway when aircraft using the runway require visual side roll guidance that cannot be provided by other external means. Solar taxiway edge light fixtures are used primarily as approach guidance for aircraft landing at airports and are capable of providing the pilot of an aircraft with an indication of the direction of approach.
The PAPI system shall be constructed and arranged so that the pilot on approach:

a) When on or approaching the approach slope, the two lamps closest to the runway will be seen in red and the two lamps farther from the runway will be seen in white;

b) above the approach slope, see the nearest fixture to the runway in red and the three farthest fixtures from the runway in white; more above the approach slope, see all fixtures in white;

c) Below the approach slope, the three fixtures closest to the runway are seen in red and the farthest fixture from the runway is seen in white; further below the approach slope, all fixtures are seen in red.

 

Features

Electrical
 

LED as light source saving power consumption and maintenance,

95% less power than equivalent incandescent light

 

Power supply available in AC(110V, 240VAC), DC48V

Physical
 

Unique designed polycarbonate lens for converging light and also

provides corrosion resistance and UV protection.

UV protection Powder coated bright yellow color base make better

visibility

 

Base material is stainless steel which has strong corrosion

resistance, Shock and Vibrations protection
 

Fragile coupling reduce the secondary damage to helicopters

effectively

 

 

Optional

Infrared LED for pilot using NVG(Night Vision Goggles)

 

Controller for power supplying and turn ON/OFF light

 

VHF pilot to ground remote control

 

Solar power system

Compliance

 

ICAO Annex 14 Volume II -Figure 5-11
FAA AC 150/5390-2B Heliport Design Guide

 

Specifications

Main functions and features:

The cover is made of PC material, which has particularly good impact strength, corrosion resistance, UV resistance, thermal stability and flame retardancy.

The light source adopts imported LED light source, low power consumption, light source life up to 100000h, widely used by domestic and foreign aviation industry;

The lamp base is made of aluminum alloy and SUS304 stainless steel, and the surface adopts plastic spraying process, which has the characteristics of light weight, waterproof, anti-vibration and corrosion resistance.

The power line of the lamp is equipped with anti-surge device (can resist lightning strikes In 7.5KA/5 times, Imax 15KA), which can be applied to the harsh climate environment.

The battery uses advanced power management system, which provides comprehensive protection for under-voltage, over-voltage and float charging of the battery, and effectively improves the service life of the battery.

Adopt conventional lithium iron phosphate battery, easy to replace.

Easy folding structure design, effectively prevent secondary damage to the helicopter.

Light source adopts plug-and-play installation, simple and safe maintenance.  

Stable operation, low maintenance cost.

Customizable function: with the special remote control can realize remote control.

Installation and use method.

The lamp must be installed in a place where it can fully receive sunlight to ensure that it can work continuously.

Turn on the battery switch at the bottom of the fixture when it is used for the first time, and turn off this switch when it is stored for a long time.

The lamp has a light control function, when the ambient illumination is lower than the light control illuminance switch value the lamp starts to work.

Cautions

Make sure the power supply voltage is the same as labeled before use.

Do not open any part of the lamp body while the product is working to prevent danger.

This product is a sealed structure, non-professional maintenance personnel, please do not disassemble, once found, the company will not warranty.

 

 

Dimension

Company Profile

Ming Feng Lighting Co., Ltd. is a leading LED lighting manufacturer with its own factory. Our company specializes in the design, production, and distribution of high-quality LED lighting products. With years of experience in the industry, we have established a reputation for excellence and innovation in LED lighting technology. Our team of skilled professionals is dedicated to providing customers with the best LED lighting products and services. At Ming Feng Lighting Co., Ltd., we pride ourselves on our commitment to quality and customer satisfaction. Whether you are looking for residential or commercial LED lighting solutions, we have the expertise and resources to meet your needs.

 

FAQ

Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.

Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.

Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.

Q5: How long time to ship the goods if place an order?
A5:  Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.