30W 0-10V Dim Die-Casting Aluminum Waterproof Weatherproof Smart Control Photocell Highways Parks Square Parking Lots LED Flood Light

• Customization: Available
• Power Supply: AC
• Application: Square, Highway, Garden, Parking Lot
• Model NO.: MFSL-G9-030
• IP Rating: IP66
• Certification: CE, CQC, EMC, Energy Star, ETL, FCC, RoHS, SAA
• With Light Source: With Light Source
• CRI: 70+/80+/90+
• Thd: <15%
• Luminous Efficacy: >0.92
• Driver Brand: Sosen
• Ik: Ik08
• Beam Angle: 160°/85°, 160°/95°
• Output Voltage: VDC22-36V/32-54V
• Lens Material: Polycarbonate
• Lifespan: >60, 000hrs
• Luminous Flux: 140lm/W
• Light Source: Cr-Ee 3030/5050
• Accessory: 0-10V Dim/Photocell/Shortcap
• Dim: 0-10V Dim
• Sensor: Photocell
• PF: >0.95
• Transport Package: Carton Box
• Trademark: MF
• Origin: China
• HS Code: 94054290
• Production Capacity: 10000PCS/Mouth

Product Description

30W 0-10V Dim Die-casting Aluminum Waterproof Weatherproof Smart Control Photocell highways parks square parking lots led flood light

Product Description

World class brand chips, high brightness, low light decay & long life-time

International driver brand, overheat protection, high convert efficiency, high PF & surge protection, (1-10V,DALI2.0)

Die-casting technology with ADC12, excellent thermal management and balance the internal & external temperature,
reduce chip Tj and light decay.

Optial UV resistant PC lens with 94% light transimitance, IK08.

Light Distribution: 70*140°

Pole installation.

peration temperature: -35C- +50C

Color	Warm White (WW)	Neutral White (NW)	Cool White (CW)	Cool White (CW)
Color Temperature	3000±300K	4000±300K	5000±300K	5700±3000K
Typical CRI	≥70
BeamAngle	160"185°,160"195°
Material	Alloy Aluminum,Optical PC,Tempered Glass,Stainless Steel
Operating Temperature	-30°C~+60°ºC
Storage Temperature	-30°ºC~+50°ºC
Frequency	47~63HZ
Input Voltage	100~240VAC

 

Power Consumption	20W	30W	40W	50W	60W	75W
lnstant Output Lumen	2800 lm	4200 lm	5600 lm	7000 Im	8400 lm	10500 lm
LED Quantity	40 pcs	64 pcs	80 pcs	96 pcs	96 pcs	112 pcs
Power Consumption	100W	120W	150W	180W	200W	240W
lnstant Output Lumen	14000 lm	16800 lm	21000 lm	25200 Im	28000 im	33600 lm
LED Quantty	114 pcs	192 pcs	192 pcs	224 pcs	288 pcs	336 pcs
types Typical System	140 lm/w (After PC lens)
LED Chip	Lu-mileds 3030

 

 

Power Consumption	20w	30w	40w	50w	60w	75W
Instant Output Lumen	3000 lm	4500 Im	5800 Im	7000 Im	9300 Im	11250lm
LED Quantity	96 pcs	96 pcs	96 pcs	96 pcs	160 pcs	160 pcs
Typical System Efficency	150 Im/w		145 lm/w	140 Im/w	155 Im/w	150 Im/w
	After PC lens

 

Power Consumption	100w	120w	150w	180W	200w	240W
lnstant Output Lumen	14500 lm	18600 lm	22500 lm	26100 lm	31000 lm	36000 lm
LED Quantity	160 pcs	320 pos	320 pcs	320 pcs	480 pcs	480 pcs
Typical System Effidency	145 Im/w	155 Im/w	150 lmlw	145 Imlw	155 Impcsw	150 Imkw
	After PC lens
LED Chip	Lu-mileds 3030

 

Power Consumption	20w	30w	40w	50w	60w	75w
lnstant Output Lumen	/	/	/	/	8700 Im	10500 lm
LED Quantity	/	/		/	160 pcs	160 pcs
Power Consumption	10ow	120w	150w	180w	200w	240W
lnstant Output Lumen	14000 lm	17400 Im	21750 lm	25200 Im	29000 lm	33600 lm
LED Quantity	160 pcs	320 pcs	320 pcs	320 pcs	448 pcs	448 pcs
Typical System Efficiency	140 Im/w	145 Im/w		140 Im/w	145 Im/w	140 Im/w
	After PC lens +Tempered glass
LED Chip	Lu-mileds 3030

                                                                                                  
Product dimension:

                               (20~50W)                                                                                                                                     (20~240W)

                                   (60~240W)(L1xW1xH1)                                                                             (60~240W)(L2xW2xH2)

Model MFSL-G9-020 MFSL-G9-030 MFSL-G9-040 MFSL-G8-050 MFSL-G9-060 MFSL-G9-075	Power	(L1xW1xH1)	(L2xW2xH2)	EPA	l*w*h(mm)	NW	NW(with glass)
	20w	405x135x78.5	/	0.0546m²	440x170x125	1.5KG	/
	30w	405x135x78.5	/	0.0546m²	440x170x125	1.5KG	/
	40W	405x135x78.5	/	0.0546m²	440x170x125	1.5KG	/
	50W	405x135x78.5	/	0.0546m²	440x170x125	1.5KG	/
	60w	530x301.5x92	444.5x301.5x170.5	0.1597m²	565x345x135	4.0KG	4.5KG
	75W	530x301.5x92	444.5x301.5x170.5	0.1597m²	565x345x135	4.0KG	4.5KG
MFSL-G9-100 MFSL-G9-120 MFSL-G9-150 MFSL-G9-180 MFSL-G9-200 MFSL-G9-240	100w	530x301.5x92	444.5x301.5x170.5	0.1597m²	565x345x135	4.0KG	4.5KG
	120W	695x310x92	605.5x310×170.5	0.2154m²	730x345x135	5.6KG	6.6KG
	150W	695x310x92	605.5x310x170.5	0.2154m²	730x345x135	5.85KG	6.85KG
	180W	695x310x92	605.5x310x170.5	0.2154m²	730x345x135	5.85KG	6.85KG
	200w	865x350x92	779.5x350x170.5	0.3027m²	900x385x135	7.6KG	9.4KG
	240W	865x350x92	779.5x350x170.5	0.3027m²	900x385x135	7.8KG	9.4KG

             

 Photometry

LIGHT DISTRIBUTION CURVE

LUX LEVEL CHART

  

Installation Instructions

   

Wiring:
Cut off the power input (turn the switch gear to "OFF"). Connect the core wires of the powyer cableto the input wire of lamp correspondingly (lamp input wire: brown to the powerrid l (liye line),blue to the power grid N (Neutral line), yellow-green to the power grid G (ground wire) , and wrapwith fireproof insulating tape according to safety regula-tions).

Installation steps:
1.Screw the photocontrol onto the base (optional)2.Fasten the hoop to the lamp body with bolts3.Connect the cable according to the wiring diagram4Loosen the fastening screws, align the hoop mouth with the light pole in the direction of thearrow shown in the figure, and slowly slide the light pole to the bottom;5.Refer to the level bubble, rotate the lamp to keep it parallel to the direction of the road, thentighten two fixing screws, and finally tighten two fastening nuts.

Remarks:
Light pole diameter can be 52mm ~ 60mm;Horizontal or vertical installation available, + 15 °elevation and depression angle adjustment;Hex wrench would be used when installing, and the tightening strength is 18Nm.

Inspection after installation:
1.Firmness, cleanliness; direction, angle.
2.The wire is not exposed and the wire sheath is not damaged.3.Power-on inspection (air switch and other devices need to be turned to the ON position); thecontrol system need overall adjustment; For lamps with construction errors, they need to bepower off and to do re-construction.

Packaging & Shipping

Diagram of Pallet loading



                                                  20ft Container loading                                                            40ft Container loading

 

 

Application

Street lights are commonly used to illuminate roads, streets, highways, parks, squares, parking lots and other public places. They can provide nighttime lighting, improve visibility for pedestrians and vehicles, reduce the risk of traffic accidents, and increase public safety. In addition, street lights can also be used for:

 

Enhance the urban landscape: The use of street lights in cities and communities can improve the beauty of the urban landscape and night environment, and promote urban tourism and economic development.

 

Wildlife protection: The use of street lights in protected areas and nature reserves can improve the safety of visitors at night and reduce disturbance to wildlife.

 

 

Increase the sense of security of residents: The use of street lights in the community can increase the sense of security of residents, improve the environmental quality of the community, and reduce the crime rate.

 

 

In conclusion, street lights can be used in many different venues and applications to increase public safety and visibility, improve urban environments and landscapes, and protect wildlife and the natural environment.
 

 

FAQ:

Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.

Q2: Can I order a sample of the LED High Mast Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.

Q3: What is the lead time for the LED High Mast Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.

Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).

Q5: Can I print my logo on the LED High Mast Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.

Q6: How do I proceed with an order for the LED High Mast Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.

Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.