Medium-Intensity Type B Unique Patented Technology Aviation Obstruction Light / For /Warning Light/Solar Marine Light/ Aviation
This LED Medium-intensity Type B L864 Aviation Obstruction Light flashing red color, designed for marking top of obstacle which height is more than 45meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption.
ModelPower inputLight sourceFlash rateLens colorPhotocellDry contact AlarmGPS sync flashingContro
| Model |
Power input |
Light source |
Flash rate |
Lens color |
Photocell |
Dry contact Alarm |
GPS sync flashing |
Control |
| MF-MI-B2 |
110-240Vac&48Vdc
12Vdc
36Vdc
48Vdc |
LED
IR
LED&IR |
Steady
20FPM
30FPM
60FPM
40FPM |
Clear |
Built-in/
No |
No Alarm/
Alarm |
NO SYNC/
GPS SNYC |
Used alone/
Used with controller |
Light Characteristics
Light Source CREE high intensity
LED Available Colors White(Other color is optional)
Intensity(cd) ≥20,000cd (Daytime) ≥2,000cd(Night)
Horizontal Output(degrees) 360
Vertical Divergence(degrees) 3
Flash Characteristics 20-60 flashes per minute(factory setting: 20fpm) Operation Mode 24hours operation, 2 different modes
LED Life Experience(hours) >100,00
Electrical Characteristics
Operating Voltage : DC(48VDC) &AC(110-240VAC) or others
Instantaneous power(W) : 40
Average Power(W) : 3W(20fpm)
Lightning surge : IEC61000-4-5 L- N ±3kV
IEC61000-4-5 L- PE ±6kV
IEC61000-4-5 N- PE ±6kV
Electrostatic : IEC61000-4-2 Contact discharge 8kV
Circuit Protection : Integrated
Physical Characteristics
Body Material : UV protected Polycarbonate
Base Material : Powder-coated Die-casting aluminum
Mounting : 190×190×θ12
Dimension(mm) : 229×229×168
Weight(kg) : 2.5
Product Life Expectancy : 10 years Plus
Environmental Factors
Ambient Temperature(ºC) : -40~75
Storage temperature(ºC) : -55~70
Humidity : 10%-95%RH(No condensation)
Wind Speed : 240m/s
Waterproof : IP66
Compliance
ICAO : Annex 14 Volume 1,'Aerodrome Design and
Operations' Seventh edition July 2016, table 6.3
Low-intensity Type A/B/E Obstacle Light
FAA : L-864
Options Available
Flashing rate
NVG(Night Vision Goggles) compatible LED
Dry contact alarm(NO COM NC)
GPS sync flashi
RS485 communication
Bird deterrent spik
Features
Electrical
CR-EE LED, make sure LED keep bright while use for long time
Power supply in DC(48V)& AC(110-240VAC), the light could work normally when input 48VDC/110VAC/240VAC
Physical
Bird deterrent spike on top
Unique designed PMMA lens for converging light and good transparency
High translucency and anti-UV polycarbonate cover could use 3-5years without yellowing
UV protection Powder coated bright yellow color base make better visibility and also long life in harsh environments
Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection
3/4inch thread hole make pole installation easy
No screw fix type - just twist, the cover will be fixed tightly
System design
Built-in photocell for day/night operation(dusk to dawn operation, automatically turn on when background luminance is below 50cd/m2
Steady/20FPM/30FPM/60FPM DIP switches on PCB
Surge and lightning protection
Main-standby mode, when the main light fail, the standby light automatically switch on to ensure the obstacle is always clearly marked.
Optional
Infrared LED for pilot using NVG
Alarm contact output (Dry contact- NO COM NC), When power failed alarm generate & also when LED fails alarm generated
Solar power system
Product dimension:
Installation Instructions
Flat surface mounting is optional
(Mounting bracket is charged separately, and size is customized) Wiring diagram
LED Aviation Obstruction Lights have various applications in the aviation industry to enhance safety and visibility. Some of the key applications include:
Tall Structures and Buildings: LED Aviation Obstruction Lights are installed on tall structures such as towers, chimneys, skyscrapers, and communication masts to make them more visible to aircraft, especially during low visibility conditions or at night. These lights help pilots identify potential obstacles and navigate safely.
Airports and Helipads: LED Obstruction Lights are used at airports and helipads to mark various structures and objects that may pose a hazard to aircraft, such as runway lights, taxiway lights, wind turbines, control towers, hangars, and other buildings in the vicinity. These lights alert pilots to the presence of obstacles and ensure safe takeoffs, landings, and ground operations.
Telecommunication Towers: Telecommunication towers are often equipped with LED Aviation Obstruction Lights to comply with aviation safety regulations. These lights help prevent collisions between aircraft and the towers, especially during low visibility conditions. They are essential for towers located near airports or in flight paths.
Power Transmission Lines: LED Obstruction Lights are installed on power transmission lines and high-voltage towers to make them visible to pilots. These lights prevent aircraft from coming into contact with the power lines, ensuring the safety of both the aircraft and the power infrastructure.
Wind Turbines: Wind farms with wind turbines also require LED Aviation Obstruction Lights to comply with aviation safety regulations. These lights are installed on the turbines to warn pilots of their presence and prevent potential collisions.
In summary, LED Aviation Obstruction Lights play a crucial role in marking and illuminating various structures and objects in the aviation industry. They ensure the safety of both aircraft and ground structures by enhancing visibility and reducing the risk of collisions.
1.From the date of purchase, the product is provided with a free warranty for 5 years, and the following conditions are not included in the free warranty during the warranty period:
Failure and damage caused by unpacking products;
Failure caused by falling and touching during handling and use;
Failure to operate in accordance with the instructions.
2.After the warranty period, if the parts need to be replaced during the maintenance process, only the cost of materials to replace the parts, free of time costs.
Ming Feng Lighting Co.,Ltd is one of the leading LED light product, located in Guangdong Province, China. Established in year 2009 and has more than 14 years experience in exporting LED lighting products. Ming Feng LED lighting factory produce LED Indoor Light and LED outdoor lamp. For the LED indoor light, we are producing the LED Triproof Lights, LED Vapor Tight Lights,LED down lights ,LED Flat panel, For the Outdoor LED Light, we are producing the LED flood light, LED high bay lighting, LED sports lights and some of outdoor LED landscape light.With the rapid growth of our sales volume in the market, our R&D are expanding quickly to meet the market demands.
Our main market is in European, South American and North American. Our factory locates between Shenzhen port and Guangzhou, it's convenient to visit our factory and delivery the container to all around the world based on Shenzhen port.
Ming Feng Lighting Co., Ltd warmly welcome all the partners visit our factory and share the ideas of the LED light. Ming Feng Lighting factory stays with you all the time to share the happiness of the LED light, let's work together to create an outstanding future.
HISTORY
Ming Feng Lighting Co.Ltd factory established in year 2009 and has 14 years great experience in exporting LED lighting products. We dedicate ourselves in the LED lighting area to develop the market-oriented LED light product. We are proud of that, our factory can manufacture the outstanding LED light with high quality standard.
SERVICE
Ming Feng lighting CO.,Ltd providing the OEM & ODM service for all the partners all around the world, Our LED light is in high quality standard at reasonable and competitive price, our designer and engineer help our LED light in tasteful design and excellent performance.We are able to offer our valuable clients:
★
OEM/ODM Serivce
★
Photometric/IES file
★
Dialux simulation design
★
PCB Design/Driver Design
★
Heat Management/Optical Design
★
Industry Design
★
Market Support
★
3D Printing
★
Multiple Listing/Private Label.
OUR TEAM
Ming Feng Lighting Co.Ltd has 200 employees, which include administrative staff 30 people, engineers 10, industrial designer 5, quality control department 8, and 150 people involve in production line as well warehouse and logistics department.
FAQ:
Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.
Q2: Can I order a sample of the LED Tri-proof Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.
Q3: What is the lead time for the LED Tri-proof Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.
Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).
Q5: Can I print my logo on the LED Tri-proof Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.
Q6: How do I proceed with an order for the LED Tri-proof Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.
Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}