250W 3-in-1 9 Color Plates + White Light DMX-512 540° Pan LED Effect Laser Dancing Moving Head Lights Beam Stage Light LED Mini Wash moving spot light
| Options |
Instructions |
| Running mode |
DMX |
Slave state: Receives DMX signals from the console or mainframe |
| |
Bootstrapping |
Host state: Self-actuated and sends DMX signal to slave |
| |
Voice control |
|
| DMX address |
1-512 |
Press "OK" to enter editing mode.At this point, the hundreds digit is selected, and press the "up" and "down" keys to change the address code.Press the "OK" key again to select the tens edit.Press "OK" once more to select the ones edit.Press again to exit the editing state |
| Motor reset |
Off |
|
| |
On |
Light fixture reset |
| Channel mode |
24CH |
24 channel mode |
| Language |
Chinese |
Set to the Chinese interface |
| |
English |
Set to the English interface |
| Screen flip |
Off |
Front display |
| |
On |
Screen reverse display |
| X Inversion |
Off |
|
| |
On |
|
| Y-reverse |
Off |
|
| |
On |
|
| XY swap |
Off |
|
| |
On |
Channel for switching XY axes (including trims) |
| XY encoder |
On |
Use an encoder (optocoupler) to judge out of step and automatically correct the position |
| |
Off |
Correct the position without using an encoder (optocoupler) |
DMX signal
|
Hold |
Continue running in its original state |
| |
Clear zero |
Turn the motor back and stop running |
| The color wheel changes linearly |
On |
The color wheel changes linearly |
| |
Off |
Color wheel nonlinear change, half color change |
| Restore default Settings |
|
When you see the confirmation dialog after pressing "OK", press "OK" again to restore the default Settings |
| Channel |
Function |
| 1 |
Color |
| 2 |
Strobe |
| 3 |
Dimming |
| 4 |
Gobo |
| 5 |
Prism 1 |
| 6 |
Prism 2 |
| 7 |
Prism 1 Rotate |
| 8 |
Prism 2 Rotate |
| 9 |
Frost & Colorful |
| 10 |
Focus |
| 11 |
X |
| 12 |
X Fine |
| 13 |
Y |
| 14 |
Y Fine |
| 15 |
XY Speed |
| 16 |
Reset |
| 17 |
LED_Dimming |
| 18 |
LED_Strobe |
| 19 |
LED_Red |
| 20 |
LED_Green |
| 21 |
LED_Blue |
| 22 |
LED_Color macro |
| 23 |
LED_Scene |
| 24 |
LED_Scene Speed |
Light source power: 250W
Voltage: AC 200V~240V/50~60Hz;
Color disk: Each color disk consists of 9 color plates + white light;
Pattern plate: 9 gobos+white effects;
Glass pattern: 7 gobos+white effects;
540° translation, 270° tilt.
Overheat protection;
Control mode: DMX512/ master-slave/Automatic;
IP20 protection level
Signal cable connection
Light fixtures feature standard DMX input and output 3-core or 5-core XLR sockets.Use a
shielded twisted-pair signal cable designed for DMX 512;The signal line is generally
connected at 150 meters, and the DMX512 signal amplifier must be added for long distance signal transmission.
Connect a shielded twisted-pair signal line from the DMX outlet of the controller to the DMX input of the first device, and from the DMX outlet of the first device to the DMX input of the second device, and so on, until all lights have been connected. Then install a terminal plug on the last connected light outlet 3-core jack on each circuit.(Weld a 4/1W, 120Ω resistor between the 2 and 3 pins of the 3-core pin cannon plug).
If you use a controller with a 5 pin DMX output connector. You will need to use a 5pin to 3 pin as apter
Model No: DMX5M. Or DMX 5F
The chart below details a proper cable conversion:
Control panel
Installation Instructions
Light fixtures can be placed horizontally, slanted, and hung upside down.Be sure to pay attention to the installation method when hanging diagonally and upside down.
As shown in Figure 2, before positioning the lamp, it is necessary to ensure the stability of the installation site. When installing the reverse hanging, it is necessary to ensure that the lamp does not fall down on the support frame. It is necessary to use the safety rope through the support frame and the lamp handle for auxiliary hanging to ensure safety. Prevent the luminaire from falling and sliding.
When installing and debugging the lamps, it is forbidden for pedestrians to pass under them. Regularly check whether the safety rope is worn and whether the hook screws are loose.
Our company does not assume any responsibility for all consequences caused by the fall of the lamp due to the unstable installation of the hanging.
Schematic diagram of the lamp hanging upside down
Stage moving head lights are widely used in stage performances and performances. Here are some of their application scenarios:
Stage shows: Stage moving headlights are widely used for concerts, theatrical performances, dance performances and other stage shows. They can create a variety of lighting effects for the stage by moving, rotating and adjusting the Angle of the beam, enhancing visual impact and artistic expression.
Concerts and music festivals: In large concerts and music festivals, stage moving headlights are used to illuminate artists, bands and various parts of the stage. They can enhance the visual effects of musical performances by creating a variety of dynamics and atmospheres through color changes, beam effects and movement.
Theatre and stage plays: In theatre and stage plays, stage moving headlights are used to illuminate actors, stage sets and props. They can create different lighting scenes that highlight the emotion and drama of the performance through changes in light and projection effects.
Events and exhibitions: Stage mobile headlights are also widely used in various events and exhibitions, such as corporate events, product launches and art exhibitions. They can create memorable visuals for the scene, capture the audience's attention and enhance the atmosphere of the event.
Film and television production: In film and television production, stage moving headlights are used to illuminate sound stages, set scenes, and highlight actors. They can create lighting effects suitable for different scenes and plots through various lighting effects and dynamic changes.
Flexible, programmable and versatile, stage mobile head lamps can be precisely controlled and adjusted according to specific needs. They provide a rich variety of lighting effects for stage performances and performances, helping to create a memorable visual experience.
1.From the date of purchase, the product is provided with a free warranty for 5 years, and the following conditions are not included in the free warranty during the warranty period:
Failure and damage caused by unpacking products;
Failure caused by falling and touching during handling and use;
Failure to operate in accordance with the instructions.
2.After the warranty period, if the parts need to be replaced during the maintenance process, only the cost of materials to replace the parts, free of time costs.
FAQ:
Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.
Q2: Can I order a sample of the LED Tri-proof Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.
Q3: What is the lead time for the LED Tri-proof Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.
Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).
Q5: Can I print my logo on the LED Tri-proof Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.
Q6: How do I proceed with an order for the LED Tri-proof Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.
Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}