Factory Price RGB Single Retro Flash Lighting Disco DJ Light DMX512 Sharpy Light Party Light Moving Head Light

• Material: Aluminum
• Control Channel: 16CH
• Control Mode: Dmx Signal Control
• IP Rating: IP20
• Certification: CE, RoHS
• Voltage: AC100-240V 50/60Hz
• Model NO.: MF-DM150WSLC
• Color Wheel: 7 Colors Plus White
• Focus: Linear Focus From Close to Far
• Power Consumption: 200W
• Pan: 540°pan 16bit
• Tilt: 270°tilt 16bit
• 1 Rotated Gobo Wheel: 6gobos Plus Blank, Gobo Rotating 360°
• Specification: 290*182*400mm
• Trademark: MF
• Origin: China
• HS Code: 9405429000
• Production Capacity: 10, 000PCS/Months

Product Description

MF-DM150WSLC BEAM SHARPY MOVING HEAD LED STAGE LIGHT

Product Parameters

DMX CHANNEL

CHANNEL	FUNCTION
1	Dimmer
2	Strobe
3	Outer ring running
4	Pan
5	Pan fine
6	Tilt
7	Tilt fine
8	Pan/Tilt Speed
9	Color
10	Static gobo whee
11	Rotate gobo wheel
12	Rotated gobo rotate
13	Focus
14	Prism rotate
15	Marco function
16	Reset

3DMX CHANNEL

CH	FUNCTION	VALUE	DESCRIPTION
1	Dimmer	0-255	from dark to bright
2	Strobe	0-10	no strobe
		11-255	From slow to fast strobe
3	Outer ring running	0-4	Null
		5-9	Red
		10-14	Green
		15-19	Blue
		20-24	Yellow
		25-29	Purple
		30-34	Cyan
		35-39	White
		40-59	Running effect1
		60-79	Running effect2
		80-99	Running effect3
		100-119	Running effect4
		120-139	Running effect5
		140-159	Running effect6
		160-179	Running effect7
		180-199	Running effect8
		200-219	Running effect9
		220-239	Running effect10(whole effect)
		240-255	Running effect11(sound control)
4	Pan	0-255	Pan
5	Pan fine	0-255	Pan fine 16 bit
6	Tilt	0-255	Tilt
7	Tilt fine	0-255	Tilt fine 16 bit
8	Pan tilt speed	0-255	Pan& tilt speed slow
9	color	0-9	white
		10-19	white+color 1
		20-29	color 1
		30-39	color 1+color 2
		40-49	color 2
		50-59	color 2+color 3
		60-69	color 3
		70-79	color 3+color 4
		80-89	color 4
		90-99
		100-109	color 5
		110-119	color 5+color 6
		120-129	color 6
		130-139	color 6+color 7
		140-149	color 7
		150-159	color 7+white
		160-255	color anticlockwise from slow to fast water
10		0-9	white

TECHNICAL SPECIFICATION

Voltage	AC100-240v 50/60Hz
LED	1pc 150W white LED + 24pcs RGB3in1 LED
Power consumption	170W
Color wheel	7 colors+open
Gobo wheel	1 fixed gobo wheel: 8gobos plus blank 1 rotated gobo wheel: 6gobos plus blank,gobo rotating 360
Prism	5 facets prism with rotated function
Focus	linear focus from close to far
Max temperature	104°F(40°C)
Data input/output	3pin XLR-connection,anode socket
Outside size	290*182*400mm
N.W	7.5kg

Product Features

*Light source:1pcs 150W white LED

*Power consumption:180W

*Beam Angle:13.5 degree

*Electronic dimmer 0~100%

*Pan movement:540°

*Tilt movement:270°

*Pan/Tilt resolution:8-16bit

*Prism rotating 5-facet prism

*Focus:linear focus from close to far

*1 fixed gobo wheel: 8gobos plus blank

*1 rotated gobo wheel: 6gobos plus blank,gobo rotating 360°

*1 color wheel:7colors plus white

*Strobe:0-16Hz, from slow to fast, adjusting

*Control mode:Auto, sound active , DMX512

*DMX channel:16CH

* LCD display

*Pan/Tilt invert option

*Reset to factory settings option.

*Fan Cooling /Forced convection

Setup

Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
 

FUSE REPLACEMENT

With a flat head screwdriver wedge the fuse hold out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power.

FIXTURE LINKING

You will need a serial data link to run light show of one or more fixtures using a DMX-512 controller or to run synchronized on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.

3-PIN to 5-PIN CONVERSION CHART

Note! If you use a controller with a 5 pin DMX output connector. You will need to use a 5pin to 3 pin as apter CHAUVET Model No: DMX5M. Or DMX 5F The chart below details a proper cable conversion:

SETTING UP A DMX SERIAL DATA LINK

At first link the first light and DMX control through XLR-connection signal cable, then connect the light in series, as the follow:

MASTER/SLAVE FIXTURE LINKING

1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3pin connector of the first fixture.

2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then, proceed to connect from the output as stated above to the input of the following fixture and so on.

ORIENTATION

This fixture may be mounted in any position provided there is adequate room for ventilation.

Detailed Photos

 

Operating Instructions

DESCRIPTION OF OPERATION PANEL

MANU SHEET
 

Setting	Running Mode	Controller
		Sound
		performance 1
		performance 2
		performance 3
		performance 4
		Random
	Address	1-512
	DMX	16CH

PACKING LIST

Product Name	Quantity
Moving Head Light	1 PCS
Power-line	1 BASE
User Manual	1 PCS

UNPACKING INSTRUCTIONS
On receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are presented, and have been received in a good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows, sign of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture should be returned in original factory box and packing.

SAFETY INSTRUCTIONS
Please read these instructions, it includes important information about the installation, usage and maintenance of this product. 

Please keep this user guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.

Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.

Before the first time to use it, Please check whether the damage in transit, if happen damages in transit, please do not use this lamp, and please asap contact distributors or manufacturers.

Please don't install the lamp in the ordinary combustible material on the surface.

Lamp should be installed in the well ventilated place, and the distance of the wall to keep it over 10 cm, at the same time, please check the fan hole was clear.

Do not use lamp direct project in flammable objects, lamp and the radiation of the distance between the objects please keep it over 12 m.

Do not use direct lamp project light source , to avoid damage the eyes. Before installation, please make sure your use power supply voltage and marked voltage

Note: before any install, maintain and clean lamp, please confirm cut off the power supply

SHIPPING

Where to Use

Company Profile

Ming Feng Lighting Co., Ltd. is a leading LED lighting manufacturer with its own factory. Our company specializes in the design, production, and distribution of high-quality LED lighting products. With years of experience in the industry, we have established a reputation for excellence and innovation in LED lighting technology. Our team of skilled professionals is dedicated to providing customers with the best LED lighting products and services. At Ming Feng Lighting Co., Ltd., we pride ourselves on our commitment to quality and customer satisfaction. Whether you are looking for residential or commercial LED lighting solutions, we have the expertise and resources to meet your needs.

FAQ

Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.

Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.

Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.

Q5: How long time to ship the goods if place an order?
A5:  Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.